Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The 0-16bar positive pressure method is used to test, which avoids the low pressure limit. The sealing situation can be judged by observing the leakage or pressure drop by inflation and pressure. Sensitivity is high and the reading is accurate.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
Fully automatic test with microcomputer control, pressure range 0~ -90kPa accuracy +/- 0.1kPa, equipped with 15mm thick Organic Glass sealing barrel and precision pneumatic components, support automatic constant pressure air replenishment and multi-point pressure calibrating.
Glass sealing barrel wall thickness of 15mm, automatic constant pressure gas without manual operation, vacuum accuracy level 1, support 0~ -100kPa range, suitable for a variety of Encasement sealing test.
Manual control of holding pressure is easy to operate, 15mm thick Organic Glass sealing bucket enhances compressire strength, Vacuum Level range -90~ 0kPa, resolution accurate to 0.1kPa, built-in time display automatic timing clear.
Adopting a two-stage design, the pumping speed is up to 60L/min, the ultimate pressure is 0.085MPa, and it can operate continuously for 24 hours without oil. The noise is lower than 50dB, and it has the dual function of positive and negative pressure, making it easy to maintain.
Adopt digital P.I.D. temperature control, temperature control accuracy +/- 1 ℃, heat sealing pressure 0~ 0.7Mpa adjustable, double cylinder structure to ensure pressure equilibrating, heat sealing knife aluminum alloy material uniform heat conduction, support automatic and manual mode.
Touchscreen control, automatic constant pressure gas to ensure that the experiment in the preset vacuum, Vacuum Level range of 0~ -90KPa, a key operation automatically end the test, stable and durable performance.
Adopt digital P.I.D. temperature control, upper and lower heat seal independent temperature control, heat sealing temperature range RT +~ 300 ℃, heat sealing pressure 0.05~ 0.7MPa, support manual and foot pedal start mode, anti-burn safety design.
Using negative pressure test principle, Vacuum Level range -90~ 0kPa, equipped with 4.3 inch Touchscreen and three test modes, it can automatically complete the test and display Linear dispersion in real time to meet a variety of standard requirements.
Adopt Touchscreen control, automatic constant pressure air supply, Ultimate vacuum degree -95KPa, equipped with transparent organic Glass vacuum chamber, built-in vacuum pump with low noise, one-click operation to automatically complete the test.
Using negative pressure test principle, Vacuum Level range -90~ 0kPa, vacuum accuracy 2.5; no power supply, compressed air drive, equipped with ultra-thick Organic Glass vacuum Chamber for easy observation of bubbles.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
Using compressed air drive and vacuum generator, equipped with High Accuracy pressure sensor, Vacuum Level range -90~ 0kPa, vacuum accuracy level 1, can be immersion method and expansion method two kinds of sealing performance test.
