With 18 speed Rotation speed control and 0.3-100 rpm range, automatic calculation range, support user-defined calibrate, Repeatability up to +/- 0.2% F. S, accuracy +/- 1% F. S, can measure 1~ 2000000mPa · s viscosity.
Measurement range 100-13000000cP, equipped with 18 gear Rotation speed control, with automatic range calculation and Self-check function, support user-defined calibrating and 10 language selection.
With 18-speed Rotation speed control and 0.3-100 rpm range, Measurement accuracy of +/- 1% F.S., support for automatic range calculation and user-defined calibrate, easy and reliable operation.
Can measure the dynamic viscosity of normal temperature solid high temperature molten fluid, viscosity range 10~ 200000mPa · s, Temperature range RT +~ 250 ℃, repRoducibility +/- 0.5% F. S, support a variety of Rotor speed and timing functions.
The motor is used to drive the top edge to rise, the edge length is 150mm, and the rising rate is 3mm/min, which can accurately test the dynamic anti-cracking performance of the material against the crazing expansion of the substrate, and the operation is light and stable.
With 200-320000000mPa · s wide range and +/- 1% Measurement accuracy, support PT100 temperature detection and 10 sets of program storage functions, can automatically calculate Rotor speed combined range.
Measurement range 100-13000000cP, Repeatability +/- 0.2% F.S., supports 10 program stores and TTT/TTS Measurement mode, can automatically calculate the range and export Excel data.
Equipped with automatic centering device to avoid eating unilateral problems, maximum load 50Kg, Test speed range 0-100mm/min, support dynamic Impedance test and a variety of damage strength test.
Measurement range 200-106000000mPa · s, accuracy +/- 1% F. S, support 18-speed Rotation speed control and PT100 temperature sensor, with Self-check function and 10 sets of program storage, can generate Excel data reports.
Using Dynamic Low Temperature Nitrogen Adsorption Method and High Sensitivity Sensor, the test range from 0.0005m ²/g has no upper limit, the repeatability error ≤ +/- 3%, and the single sample test is completed in about 3 minutes.
With 2-level accuracy and +/- 2% Indication Error, it supports three test modes of real-time tracking, peak holding and first peak, and can store 99 sets of data and automatically calculate statistical values.
With 1 level accuracy and +/- 1% Indication Error, it supports three test modes of real-time torque tracking, peak holding and first peak, and can store 99 sets of data and automatically calculate statistical values.
With 1 level accuracy and +/- 1% Indication Error, supports automatic conversion of three units and 99 sets of data storage, can set peak hold time and upper and lower limit alarms, equipped with dedicated software for data analytics and Linear dispersion display.
Can simultaneously detect dynamic and static Coefficient of Friction, force range 0~ 5N, accuracy level 1, support microcomputer control and micro printer output test report.
With +/- 2% indication relative error and 0.1N.m resolution, it supports three test modes of real-time tracking, peak holding and first peak, and can set upper and lower limits for comparison and automatically calculate statistical values.
