The use of PTFE oxygen permeable membrane to ensure oxygen permeability, spiral cap design for easy installation and electrolysis filling, suitable for Portable dissolved oxygen measurement equipment maintenance.
PTFE oxygen permeable membrane ensures oxygen permeability, ABS plastic material enhances durability, screw cap design simplifies installation process, suitable for long-term water quality monitoring applications.
Using PTFE oxygen permeable membrane, the probe cathode and anode are isolated from the sample, and oxygen passes through the membrane and acts with the polarographic system to generate current to ensure accurate and reliable measurement.
Using high density polyethylene (PE) oxygen permeable membrane to achieve efficient oxygen diffusion, equipped with ABS plastic screw cap structure for easy installation and electrolysis filling, and interact with the current system for accurate measurement of dissolved oxygen concentration.
Sterling silver cathode and zinc anode construction, integrated temperature sensor for instant measurement without conditioning time, thin permeable membrane isolates Sensor and allows oxygen to pass, generating current to determine oxygen concentration.
Built-in temperature sensor and microchip to store calibrated information, ultra-thin 12mm design for easy use in narrow containers, Measurement range 0-300% Blood Oxygen Saturation, PTFE membrane cover for easy replacement and maintenance.
Measurement range of dissolved oxygen 0.00-45 mg/L, accuracy +/- 1.5%, support automatic temperature compensation and salinity compensation, equipped with polarographic ElectRode, can store 1000 sets of data, suitable for a variety of environment detection.
Equipped with 7-inch color Touchscreen, support 5 ElectRode management and 1000 data storage, with three reading modes and automatic temperature and pressure compensation function, dissolved oxygen Measurement range 0-90mg/L, accuracy +/- 0.10mg/L.
Can simultaneously measure pH, dissolved oxygen and temperature paraMeters, support automatic temperature compensation and ElectRode diagnosis, data storage capacity of 450 groups, with statistical analysis and Bluetooth printing function, dustproof and waterproof grade IP54.
An ultra-thin 12mm diaMeter design for easy measurement in narrow containers, built-in thermistor temperature sensor compensates for 0 to 50 ° C variations, PEI body material and PTFE oxygen permeable membrane for increased durability and maintenance efficiency.
Measurement range of 50ppm dissolved oxygen and 600% Saturation, support pressure, temperature and salinity automatic compensation, can be used continuously for about 200 hours, with IP67 waterproof rating.
Using Optical inspection Measurement principle, the range covers 0.00-20 mg/L, without frequent replacement of membrane and electrolysis solution, easy maintenance, fast Response, suitable for long-term continuous monitoring.
Polarography design, equipped with PTFE membrane can be quickly replaced, integrated temperature sensor to achieve temperature compensation, suitable for BOD testing, long probe shaft can be directly loaded into the BOD bottle for 5-day latency measurement.
Support conductivity 0-200mS/cm and dissolved oxygen 0-20mg/L measurement, with automatic temperature compensation, ElectRode diagnostic function and IP54 Protection Rating, Data storage up to 450 groups and support Bluetooth printout.
Optical inspection fluorescence technology for measurement of dissolved oxygen, no polarization time, fast Response and not affected by Flow velocity; Built-in temperature sensor, Measurement range 0.00-50 mg/L, accuracy up to 1.5% +/- 0.01mg/L; Protection Rating IP68, suitable for harsh environments.
