Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
Used for paint film hiding power measurement and reflectance measurement, indication interval 0-100, Repeatability 0.3%, in line with national standards GB/T13452.3, GB9270, GB5211.
Measurement accuracy of +/- 1, resolution 0.1, support USB and Bluetooth data output, using Photocell, photovoltaic cell technology for reflectance detection, suitable for a variety of material surface analysis.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
With 45/0 reflectance and hiding power test function, repeability 0.2%, repRoducibility 0.5%, automatic calibration and correction of black and white board values, support USB data transmission and statistical mode.
Made of high-quality non-fluorescent paper, does not contain Fluorescent Whitening Agent, black reflectance < 1, white reflectance 80 +/- 2, Laminating design enhances anti-Curl ability, test area of 0.1 square Meters.
White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
Using non-fluorescent paper substrate, white reflectance 80 +/- 2, black reflectance < 1, Laminating design enhances Curl resistance, 0.1 square Meter standard area is suitable for spreading rate testing.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Made of non-fluorescent paper, does not contain Fluorescent Whitening Agent, the black part reflectance is less than 1, the white part reflectance is 80 +/- 2, the surface is smooth and anti-Curl, and the test area is 0.1 square Meters.
White part reflectance 80 +/- 2, black part reflectance less than 1, surface smoothing anti-Curl, suitable for 0.1 square Meter spreading rate test, wettability is good for checking.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The pressure range of the probe is 50~ 250N, the diaMeter of the rubber probe is 40mm, and the degree of paint film chalking is evaluated by comparing the imprint of the photo paper with the standard sample, which is suitable for the detection of various environmental factors.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
