Measurement range from 0.1 to 200000 Lux, Lux and FC Unit switch support, built-in MAX Maximum retention function, compact and easy to carry, ABS plastic housing to ensure durability.
With 0.2 °~ 2.0 ° continuously adjustable observation angle and a variety of incident angle settings, Measurement range 0~ 1999 mcd • lx-1, using silicon diode Detector and standard A Illuminant, to ensure Measurement accuracy consistent with international standards.
The instrument's observation angle is continuously adjustable from 0.2 ° to 2.0 °, the incident angle covers +/- 0 ° to +/- 20 °, and the Measurement range is 0~ 3000 mcd • lx-1. It uses silicon diode Detectors and standard A Illuminants to ensure measurement accuracy.
Measurement range 0~ 100%, resolution 0.1, using LED Illuminant, support single or continuous measurement, solid and portable structure, can output data through RS-232 data line.
Measurement range is 0~ 1999mcd · lx-1 · m-2, which supports field and laboratory use and meets a number of international and domestic standards.
Measurement range 0.03-50 um, resolution 0.01um, supports multi-layer platings and alloy platings measurement, with custom hotkeys and LCD display, easy to operate without adjusting Sensitivity.
Using DSP chip control, Measurement speed is fast and low power consumption; Vertical Measurement range up to 160μm, support more than 20 kinds of paraMeters such as Ra, Rz; Built-in lithium battery works continuously for more than 20 hours, storing 100 sets of data.
Range up to 1 million cd/m ², 10mm and 20mm replaceable Probe, support instantaneous measurement, simultaneous display of real-time luminance values, MAX Maximum, MIN Minimum and Average, and stroboscopic measurement and Spectral Curve analysis.
Simultaneous measurement environment Humidity and surface temperature, accuracy of +/- 0.5 ℃, storage of 20000 readings, support for a variety of K-type Probe extended measurement, with real-time graphics display and wireless transmission function.
Measurement accuracy, aging resistance and long life, temperature measurement range -10 ℃~ 40 ℃, humidity measurement range 0% RH~ 90% RH.
Silicon Photocell, photovoltaic cell detection to ensure accurate and stable measurement, potassium and sodium can be detected at the same time and have lithium calcium detection function, small sample Sensitivity, Response Time is less than 8 seconds, with flameout protection function safe and reliable.
Adopt 60 ° Measurement Angles, Measurement range 0~ 1000GU, Repeatability 0.2GU, support USB and Bluetooth interface, can store 10000 sample data, suitable for surface Gloss measurement of various materials.
Measurement range 0.23 nm g/L to 23 g/L, temperature compensation 5~ 50 ℃, suitable for high purity water and industrial drainage sodium ion concentration determination, repeatability error does not exceed 0.03pNa.
With Lux and FC dual unit measurement, Measurement range 0.01-2000 0Lux, support Bluetooth data transmission and MAX Maximum hold function, compact and easy to carry.
Sensor using electromagnetic force equilibrating principle, Sensitivity and high accuracy, support platinum plate method and platinum ring method, automatic measurement without calculation, surface tension Measurement range 0~ 500mN/m, accuracy 0.01mN/m, real-time display Linear dispersion and preservation results.
