11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
The circular cutter is designed with eight incisions and 1mm spacing between the teeth. It is suitable for strong substrate adhesion testing with a Coating thickness of less than 60 microns and meets the requirements of ISO 2409.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
11 teeth blade design, 1.5mm isometric cutting, equipped with automatic adjustment of the blade holder to ensure pressure Balance, circular cutter with eight incisions, suitable for 50-125μm film thickness environment test.
Made of stainless steel, with 6 cutter teeth, the cutter tooth spacing is 2mm, which can provide a uniform cutting effect and is suitable for paint film adhesion testing.
Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
Adopting 6 cutter face circumference multi-face cutter tooth structure, the service life is significantly improved. The cutter tooth spacing is 1mm, which is suitable for the testing requirements of solid substrates with film thickness below 60μm.
Adopting 6 cutter face circumference multi-face cutter tooth design, the service life is significantly extended; the number of cutter teeth is 11, and the spacing is 2mm, which is suitable for hard substrate testing in the range of 60-120μm film thickness.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Equipped with 11 teeth 1mm pitch stainless steel cutter head, suitable for 0-50μm film thickness test, adjustable cutter head angle, with nylon brush and 2.5x magnifying glass, to meet a variety of standard requirements.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
Equipped with 6 teeth 2mm pitch stainless steel cutter head, adjustable cutter head angle, suitable for 61-120μm film thickness test, with nylon brush and 2.5x magnifying glass, to meet a variety of international standards.
It adopts 11-tooth cutter design, provides four spacing options from 1mm to 3mm, and is suitable for paint film adhesion testing with a thickness of less than 250mm. The operation is simple and the results are accurate and reliable.
