Adopt double disc co-directional sticky Refining mode, flying knife Rotation speed 1400r/m, disc clearance 0-25mm adjustable, equipped with 3.2-inch LCD display real-time display Refining Power and power consumption paraMeters to meet the needs of different concentration Pulp experiments.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Using the mechanical action of throwing knife roller and bottom knife, it can handle 200-700g dead stock, pulp Tank volume 45 liters, Rotation speed 500 +/- 10rpm, and realize fine processing such as fiber cutting, crushing, rubbing and splitting.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
It can measure the range of 0-1000CSF, with an accuracy of 10CSF, using 304 stainless steel material and silicone sealing ring structure, with self-Adjustment, suitable for various Pulp water filtration change detection.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Measurement range 1~ 100 ° SR, sealing cone rising speed 100 +/- 10mm/s, Pulp suspension filtration rate was determined according to Schopper-Riegler method.
Rotation speed of 600r/m slurry pool and 6.0 +/- 0.2m/s line speed difference design, support 0-25mm buckling gap adjustment and three Refining pressure modes, meet the needs of 5-30g absolute dry slurry treatment, ensure experimental accuracy and Repeatability.
Made of 304 stainless steel, Measurement range 0-1000CSF, equipped with 0.50mm diaMeter screen mesh, self-calibrating, long service life.
Adopt needle measurement technology, support 150 kinds of wood measurement, measurement range 0~ 80%, accuracy +/- (0.5% n + 0.5), with LCD digital display and LED status indication, provide USB, RS-232 and Bluetooth data interface.
Measurement principle using resistance method, Measurement range 2~ 70%, accuracy +/- 2%, Response Time only 1 second. With 4 wood Measurement modes, support Data storage and voice reminder function.
Rotation speed of 200-900rpm is adjustable with a slurry Tank volume of 47 liters, and a plate inner concave diversion groove and noise silencing device are equipped to improve the experimental accuracy and operating environment.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 500mm, it is suitable for medium and low viscosity mixing. Medium and high speed operation provides efficient mixing effect.
