The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
The dust density is measured by natural accumulation method, the diaMeter of the outflow port is 12.7mm, the funnel taper is 60 ° +/- 0.5 °, to ensure the stability of the free fall process, the volume of the measuringflask is 100mL, and the material is durable and easy to clean.
Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the accuracy of light transmitance and haze display is 0.01%, equipped with thin film magnetic fixture and liquid sample Cup, and supports 2000 sets of data storage.
Driven by stepper motor, folding speed 10-200cpm, adjustable test angle 10-180 °, with automatic counting and disconnection automatic stop function to ensure Test accuracy.
High sampling accuracy, parallelism ≤ 0.015mm, thickness range of 0.1~ 1.2mm, suitable for a variety of paper strength tests to ensure accurate and reliable detection data.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
Adopt natural convection cycle to avoid sample volatilization, stainless steel liner is easy to clean, temperature control accuracy of +/- 0.5 ℃, optional multi-stage programming and independent temperature limit alarm system.
Parallel light path design can measure 100mm thickness material, accuracy +/- 1%, resolution of 0.001%, support field and fixed station two Measurement mode, suitable for a variety of Optical inspection material detection.
Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the light transmitter and haze measurement accuracy are 0.01%, support U disk storage and USB communication, equipped with thin film magnetic fixture and liquid sample Cup.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
The natural convection cycle design ensures uniform temperature, temperature control accuracy of +/- 0.5 ℃, timing function up to 9999 minutes, suitable for drying, sterilizing and other applications.
Using natural convection design to ensure uniform temperature, Temperature range RT + 10~ 400 ℃, Temperature resolution 0.1 ℃, with timing function and multiple alarm system to ensure safe and reliable operation.
The specimen is fixed with a bilateral fixture structure, with a maximum cutting section of 100 × 120mm, a transparent observation window and a powerful exhaust device. After cutting, the surface of the specimen is bright and flat without burns.
Spreader can be 30/60/90/120μm four thicknesses at the same time, using a combined quadrilateral structure, application width 160mm, stainless steel material to ensure durability and accurate film effect.
