The laser light scattering principle to achieve rapid measurement, detection sensitivity of 0.001mg/m ³, with online automatic mechanical Adjustment, built-in optical path self-cleaning system to avoid contamination of core components, support a variety of cutter selection.
Fast measurement using laser light scattering principle, with online automatic mechanical Adjustment, Measurement range 0.01-100 mg/m ³, built-in optical path self-cleaning system to avoid pollution, support a variety of cutters and sampling modes.
Micro vibration technology implementation of real-time online measurement, range 0~ 50~ 100mpa.s, accuracy +/- 0.5%, Response Time 2 seconds, suitable for a variety of fluid media.
Micro vibration technology implementation of real-time online measurement, range coverage of 0-5~ 50-5000pa.s, accuracy of +/- 0.5%, temperature 500 ℃ and Response Time only 2 seconds, suitable for high temperature and high voltage conditions.
Glass shell enhances corrosion resistance, simplifies operation without reference solution, Measurement range 0-200.0mS/cm, Suitable for High Accuracy conductivity detection of corrosion media, supports online monitoring and laboratory applications.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition display, supports 1-6 Sensor configurations, with 4-20mA, RS485 and other signal output, Protection Rating up to IP65, Response Time ≤ 20 seconds.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Using polarographic analysis technology and imported film head, the accuracy reaches +/- 1% FS, with PH and temperature automatic compensation function, supports Multi-ParaMeter simultaneous display and Internet of Things communication, Protection Rating IP65, to ensure long-term stable operation.
Modular design with low power consumption, intelligent Sensor detection technology, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, support 4-20mA, RS485 and switching signal output, Response Time ≤ 30S, suitable for a variety of industrial environments.
It can simultaneously read up to 8 water quality parameters, equipped with a 9000mAh large-capacity battery, supports Sensor address modification and temperature, zero point, slope calibrating, which is convenient for long-term operation and Facility Management on site.
Using 32-bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for gas monitoring in harsh environments.
Supports 24-hour continuous monitoring of acidity and temperature, Measurement accuracy +/- 0.2pH, resolution 0.1pH, Manual calibration method, suitable for rapid measurement of multiple batches of samples.
Modular design with low power consumption, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, support 4-20mA, RS485 and switching output, Response Time ≤ 30 seconds, can detect NH3, CL2, CO2 and EX gases.
Modular design with low power consumption, intelligent Sensor detection technology, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, support 4-20mA, RS485 and switching signal output, Response Time ≤ 30S.
