A mixed processing of 50 samples, Speed range 2500rpm, built-in point, linkage, timing three operation modes, optional a variety of foam tuberack to meet the needs of different specifications of testtube.
DC brushless motor drive, speed range of 500~ 2500rpm, up to 50 samples at a time, with soft start function to avoid splashing, Timer Range 1~ 599min, simple and efficient operation.
Pulse mode to achieve high intensity mixing, 500~ 2500rpm wide Speed range with 4mm vibration range, DC brushless motor to ensure accurate and stable speed operation.
It can handle 50 samples simultaneously, with a speed range of 500 to 2500rpm and a timing of up to 6000min. It is equipped with LCD display and microprocessor control, and is suitable for a variety of testtube accessories.
Driven by DC brushless motor, Speed range 500~ 2500rpm, can process 50 samples at a time, with soft start function to avoid sample splashing, support point and timing two operation modes.
Speed range 500~ 2500rpm, processing up to 50 samples at a time, DC brushless motor drive to ensure accurate and stable speed.
Driven by DC brushless motor, Speed range 500-2500rpm, can process up to 50 samples at the same time. With soft start function to avoid sample splashing, support two operation modes of pointing and timing, LED real-time display running status.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
The imported cold light source does not need to be preheated for 100,000 hours, supports 0.001mg/L high Sensitivity detection, is equipped with a digestion Colorimetric integrated tube to achieve safe and fast measurement, and has 4000 sets of data storage and a variety of transmission interfaces.
