CATEGORIES

    Liquid Crystal Display Low Temperature Thermostatic Bath

    Overview Products Knowledge Standards Terms
    The liquid-display low-temperature thermostatic bath cools down through a compressor or semiconductor refrigeration system, combined with a liquid medium and a temperature controller, displaying real-time temperature on an LCD screen. It is used for constant-temperature storage of laboratory samples, cooling of reaction vessels, or low-temperature testing of materials, with a typical temperature range of -40℃ to 100℃.
    Selection
    When selecting, consider that the temperature range covers experimental needs, temperature control accuracy matches sample sensitivity, and tank size accommodates equipment. Ensure the cooling power meets the required cooling rate. Check safety protections such as leakage and overtemperature protection, compare power consumption and noise data across different brands, and ensure device interfaces are compatible with existing setups.
    Temp Control Function
    Working Medium
    Product Style
    Min-TEMP
    Max-TEMP
    Temperature fluctuation
    Temp Stability
    Volume
    Circulation Mode
    Auxiliary Functions

    Terms

    Freezing Oscillator
    Thermal Shock Test Chamber
    Minimum Film Forming Temperature Tester
    Flash point
    Electrically Heated Vacuum Drying Oven
    Low-Temperature Bending Tester
    High and Low Temperature Test Chamber
    High and Low Temperature Constant Temperature Circulating Bath
    Transparent Refrigerated Constant Temperature Bath
    Low Temperature Circulating Thermostatic Bath

    Standards

    Incoming GB/T 46513-2025
    Electrochemical performance test of lithium ion battery cathode materials—Test method for low temperature performance
    Active GB/T 20154-2024
    Low Temperature Storage Box
    Active GB/T 228.3-2019
    Metallic materials—Tensile testing—Part 3: Method of test at low temperature
    Active GB/T 38534-2020
    Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
    Active GB/T 38924.2-2020
    Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test
    Active GB/T 12085.23-2022
    Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
    Active GB/T 12085.22-2022
    Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
    Active GB/T 12085.2-2022
    Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
    Active GB/T 2423.102-2008
    Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal）
    Active GB/T 2423.59-2008
    Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random）
    Active GB/T 32065.2-2015
    Test Methods of Oceanographic Instruments—Environmental Test Part 2: Low Temperature Test
    Active GB/T 39933-2021
    Rotational moulding—Test method for low temperature impact
    Active GB/T 28958-2012
    Test methods of low temperature performance for passenger car
    Active GB/T 33622-2017
    Flexible cellular polymeric materials—Low-temperature flex test
    Active GB/T 23711.2-2019
    Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing

    Instruments

    SDPTOP DCY-0506 Low Temperature Circulating Bath Liquid Crystal Display Microcomputer Temperature Control +/- 0.05 ℃ Fluctuation
    SDPTOP DCY-0506 Low Temperature Circulating Bath Liquid Crystal Display Microcomputer Temperature Control +/- 0.05 ℃ Fluctuation

    Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃, equipped with 6 liter Tank and 8L/min Pump Flow rate, support liquid level alarm and computer communication, the inner Tank and the box are made of high quality stainless steel.

    $ 1108.00
    SDPTOP DCY-1015 Low Temperature Circulating Bath LCD display Microcomputer temperature control +/- 0.05 ℃ fluctuation
    SDPTOP DCY-1015 Low Temperature Circulating Bath LCD display Microcomputer temperature control +/- 0.05 ℃ fluctuation

    Temperature control accuracy of +/- 0.05 ℃, Display resolution of 0.1 ℃, equipped with 10L/min stirring pump and liquid level alarm function, the inner Tank and the box are made of high-quality stainless steel, support computer communication.

    $ 1679.00
    RONGHUA INSTRUMENT SHA-CAB Digital Frozen Water Bath Shaker Low Temperature Circulating Bath Combination
    RONGHUA INSTRUMENT SHA-CAB Digital Frozen Water Bath Shaker Low Temperature Circulating Bath Combination

    With water Bath thermostatic oscillation and low temperature refrigeration dual functions, thermostatic range 0-100 ℃, temperature accuracy +/- 0.5 ℃, support reciprocating oscillation and digital constant speed operation, suitable for a variety of sample fostering needs.

    $ 1027.00
    SDPTOP DCY-0504 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃
    SDPTOP DCY-0504 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃

    Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃, equipped with 6 liters stirring pump Flow rate 8L/min, support liquid level alarm and computer communication function, the inner Tank is made of high quality stainless steel.

    $ 1021.00
    YIHENG BWS-10 Thermostatic water Bath Water Bath Water shortage Anti-air burning RT + 5~ 99 ℃
    YIHENG BWS-10 Thermostatic water Bath Water Bath Water shortage Anti-air burning RT + 5~ 99 ℃

    With water shortage and air burning function, Temperature Fluctuation +/- 0.3 ℃, Temperature range RT + 5~ 99 ℃, integrated sink and water Bath dual-use, easy to clean and safe operation.

    $ 391.00
    SDPTOP DCY-3006 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃
    SDPTOP DCY-3006 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃

    Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃, with liquid level alarm and communication function, 6 liters volume with 8L/min pump Flow rate, stainless steel structure.

    $ 1468.00
    SDPTOP DCY-2015 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃
    SDPTOP DCY-2015 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃

    Microcomputer thermostatic Control system, Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃, two-way communication and liquid level alarm function, Pump Flow rate 10L/min.

    $ 1889.00
    SDPTOP DCY-1006 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃
    SDPTOP DCY-1006 Low Temperature Circulating Bath LCD Microcomputer Temperature Control +/- 0.05 ℃

    Temperature Fluctuation control at +/- 0.05 ℃, Display resolution up to 0.1 ℃, equipped with circulating pump Flow rate 8L/min, support computer two-way communication and liquid level alarm to ensure stable and reliable experiment.

    $ 1145.00
    SDPTOP DCY-2006 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃
    SDPTOP DCY-2006 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃

    Microcomputer thermostatic Control system, Temperature Fluctuation +/- 0.05 ℃, Display resolution 0.1 ℃, two-way communication, equipped with liquid level alarm and 6 liters stirring pump capacity 8L/min.

    $ 1206.00
    SDPTOP DCY-4015 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃
    SDPTOP DCY-4015 Low Temperature Circulating Bath Temperature Fluctuation +/- 0.05 ℃

    Temperature range -40~ 95 ℃, Temperature Fluctuation +/- 0.05 ℃, with liquid level alarm and communication functions, the inner Tank and the box are made of stainless steel, and the pump Flow rate is 10L/min.

    $ 3559.00
    JINGTIAN LVDV-1 Digital Digital Rotational Viscometer LCD Ultra low viscosity measurement
    JINGTIAN LVDV-1 Digital Digital Rotational Viscometer LCD Ultra low viscosity measurement

    Viscosity range 0.6~ 6000000mPa · s, repRoducibility +/- 0.5% F. S, supports continuously variable speed and liquid crystal display of various paraMeters, suitable for ultra-low viscosity sample measurement.

    $ 1255.00
    JINGTIAN LVDV-1H digital display swirl/spin type high temperature Viscometer high temperature embedded heating stepless speed change
    JINGTIAN LVDV-1H digital display swirl/spin type high temperature Viscometer high temperature embedded heating stepless speed change

    Rotation speed is accurate and stable with high subdivision stepper motor, viscosity range of 10~ 1000000mPa · s, temperature accuracy +/- 0.1 ℃, support continuously variable speed and direct liquid crystal display, no need for secondary calculation.

    $ 1886.00
    NELE DC-0510 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment
    NELE DC-0510 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment

    Adopt non-heat centrifugal circulating pump to avoid temperature field interference, Temperature Uniformity up to +/- 0.05 ℃, equipped with multiple Safety protection devices, optional program temperature control and Communication interface to meet diverse experimental needs.

    $ 942.00
    NELE DC-1006 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment
    NELE DC-1006 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment

    Using non-fluorine environmental protection Compressor refrigeration, temperature fluctuation +/- 0.05 ℃, equipped with High Accuracy PT100 Sensor and domestic circulation pump, to avoid its own heat generation affecting the temperature field uniformity, to ensure stable and reliable temperature control.

    $ 861.00
    NELE DC-1015 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment
    NELE DC-1015 horizontal Low Temperature Circulating Bath High Accuracy thermostatic liquid environment

    The temperature fluctuation is controlled within +/- 0.05 ℃, the non-heat centrifugal circulation pump is used to avoid its own heat generation affecting the temperature field, and multiple Safety protection devices are equipped to ensure stable and reliable operation.

    $ 1237.00

    Articles

    Constant temperature bath selection: circulation method and temperature control range.
    This article on thermostatic bath selection primarily analyzes two core factors: circulation mode and temperature control range. The circulation mode is divided into natural convection and forced circulation, where the former is suitable for simple static experiments, while the latter offers higher precision and is better suited for multiple samples or integration with external devices.
    Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
    This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    High and low temperature alternating test chamber for measuring low-temperature embrittlement temperature of plastics
    This article introduces how to use a high-low temperature alternating test chamber to determine the low-temperature brittleness temperature of plastics.
    Thermal shock test chamber measures the thermal shock resistance of polymer films.
    This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
    Thermal Shock Test Chamber Measures Film's Temperature Change Resistance
    The thermal shock test chamber creates thermal stress inside the film by rapidly switching between high and low temperature environments, testing its resistance to temperature changes. During the test, key parameters such as temperature range and dwell time need to be set, and the film is observed for issues such as cracking or performance degradation.
    Flash point tester for determination of closed cup flash point of varnish
    This article introduces the method for determining the closed-cup flash point of varnish using a flash point tester. The flash point refers to the minimum temperature at which the vapor on the surface of the varnish ignites momentarily when exposed to a flame after heating. It is a crucial indicator for assessing the fire risk during its production, storage, and transportation.
    Thermal Shock Test Chamber Evaluates Coating Thermal Stability
    The thermal shock test chamber simulates sudden temperature changes by rapidly switching between high and low temperature environments, used to evaluate the thermal stability of coatings. In practical applications, coatings may develop internal stresses due to drastic temperature fluctuations, leading to issues such as cracking and peeling.
    The necessity of explosion-proof high and low temperature test chambers in lithium battery testing
    Lithium batteries pose a risk of thermal runaway or even explosion when tested under extreme temperatures. Explosion-proof high-low temperature test chambers, designed with pressure relief structures, explosion-proof electrical components, and intelligent monitoring systems, can safely release energy and ensure the safety of the testing process.
    Key Points for Selecting Low-Temperature Test Chambers in Rubber and Plastic Brittleness Temperature Testing
    In the testing of brittle temperature for rubber and plastics, the selection of a low-temperature test chamber must ensure testing accuracy. When choosing the equipment, it is essential to consider various parameters comprehensively based on the requirements of the testing standards.
    The flash point tester measures the safety baseline value of the solvent.
    The flash point refers to the minimum temperature at which the vapor of a flammable liquid can be ignited. It is not a fixed value but depends on the testing method and instrument. Data measured by flash point testers serve as a critical basis for evaluating the fire risk of solvents and establishing standards for safe storage and operation.
    Safety Regulations for Closed Cup and Open Cup Methods for Testing the Flash Point of Coatings.
    This article introduces two main testing methods for the flash point of coatings: the closed-cup method and the open-cup method. The flash point refers to the lowest temperature at which the vapor of a coating momentarily ignites upon encountering an open flame, serving as a critical indicator for assessing the risk of fire and explosion.
    Tensile Testing Machine Evaluates High and Low Temperature Tensile Properties of Hot Melt Adhesive
    This article introduces how to use a tensile testing machine to test the tensile properties of hot-melt adhesives at different temperatures. The performance of hot-melt adhesives varies with temperature: they may soften at high temperatures and become brittle at low temperatures.
    The essential difference between thermal shock test chambers and high-low temperature alternating test chambers.
    Both thermal shock test chambers and temperature cycling test chambers are used to test the temperature resistance of products, but their core differences lie in the method and purpose of temperature change.