Adopt D/8 lighting observation conditions, the measurement diaMeter is Φ 10mm, and the spectral reflectance Repeatability Standard Deviation is within 0.08%. It has camera framing and automatic Gloss compensation technology to ensure measurement accuracy.
Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
Light spectrum analysis technology using dual optical path, equipped with pulse xenon arc and LED dual Illuminant, support SCI + SCE simultaneous measurement, Measurement time is less than 4 seconds, with temperature and Humidity calculation compensation function.
Equipped with 2kw lamp tube to achieve instant curing, the transmission speed is adjustable from 1 to 7m/min, the irradiation distance is 100 to 200mm, the feed height is adjustable from 0 to 90mm, and the mesh belt width is 200mm, which can adapt to different pRoduction needs.
Wavelength range extended to 360-740nm, more accurate measurement. Inter-instrument Agreement only 0.12, Repeatability up to 0.01. With xenon arc and LED dual Illuminant, it provides ten million measurement life and supports six aperture adaptations to different samples.
The large diaMeter design is used to facilitate sample pouring in and out, the inner wall arc transition is easy to clean, and the accuracy is controlled within 0.2% to ensure reliable measurement results.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid small hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
Glass liner and metal sodium, 589 nm stable Light spectrum radiation, Power 20W, 6 pin design to ensure optical rotation Measurement accuracy and Illuminant Stability.
Using SCI light-containing mode and full LED Illuminant, support 34 kinds of Color Space and UV lamp, Repeatability Delta E * ab ≤ 0.05, weight only 80g, compact and portable, Automatic calibration and intelligent color difference calculation, easy and efficient operation.
Adopt mirror stainless steel argon arc welding box, Temperature range 10~ 200 ℃, Temperature Uniformity +/- 3%, equipped with microcomputer P.I.D temperature controller and hot air circulation system, can adjust the intake and exhaust volume.
Mirror stainless steel argon arc welding box, temperature control accuracy +/- 1.0 ℃, hot air circulation system to improve Temperature Uniformity, can adjust the air intake and exhaust volume, support multi-stage programmable control and independent temperature limit alarm.
MCU chip to achieve low power consumption operation, equipped with intelligent Sensor to ensure detection accuracy ≤ +/- 3% F. S, Response Time ≤ 30S, support 4-20mA, RS485 and wireless signal output, can be operated by remote control without opening the lid, with local sound and light alarm and remote monitoring capabilities.
Frequency 7MHz, Probe diaMeter 6mm, can be measured thin-walled and small arc surface, minimum pipe diaMeter Φ 15mm, Measurement range 0.75-80 mm, suitable for different environmental conditions.
Impact specimens with specified weight steel balls falling freely from a set height can evaluate the resistance to rapid deformation of materials or coatings, and are suitable for testing a variety of substrates.
It adopts 2kw mercury lamp and 365nm band to realize instant curing, the transmission speed is adjustable from 1-5m/min, the irradiation distance is adjustable from 100-300mm, and it is suitable for different workpiece sizes.
