The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and complete gas-liquid separation; the double condensation cycle design improves the extraction efficiency of pure water, the output of pure water reaches 400-500ml/hour, and the Heating power is 800-1000W to ensure that no heavy metals are detected.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and achieve complete gas-liquid separation; the output of pure water is 800-1000ml/hour, and the Heating power is 1500-2000W to ensure that no heavy metals are detected.
Measurement range 0.23 nm g/L to 23 g/L, temperature compensation 5~ 50 ℃, suitable for high purity water and industrial drainage sodium ion concentration determination, repeatability error does not exceed 0.03pNa.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Equipped with 7-inch capacitive Touchscreen, intuitive operation; Integrated four-ring Probe, Measurement range is wide and stable, support a variety of compensation algorithms; Large data recording capacity, support a variety of export methods; Suitable for high-purity water, natural water and other water quality measurement.
With manual and automatic temperature compensation function, Measurement range 0-6 PCL, resolution up to 0.01 PCL, easy operation and intuitive and accurate digital display, suitable for a variety of water quality monitoring scenarios.
Measurement principle of hanging water method, density accuracy of 0.001g/cm ³, support one key zero and temperature compensation function, can cycle display K number and purity percentage, and have mixed specific gravity determination and over-limit prompt function.
With 8 automatic frequency conversion and automatic range switching function, conductivity Measurement range of 0.0000 μ S/cm~ 1000.0mS/cm, built-in a variety of pure water detection mode and support GLP specification data management.
Measurement accuracy of 0.001g/cm ³, support temperature compensation and mixed specific gravity measurement, can cycle display K number and purity%, with over-limit prompt function, operation only needs two steps.
Suitable for low conductivity water samples with conductivity above 100 µS/cm, using polymer liquid junction design, pH Measurement range 0-11pH, Temperature Measurement range 0-80 ℃, no need to add liquid reference system.
Using platinum sheet material, Conductivity Detector cell constant 0.1, no temperature compensation function, suitable for pure water and ultra-pure water and other water quality measurement, optional Glass flow Tank.
Using platinum sheet material, Conductivity Detector cell constant is 10, suitable for high conductivity environment water measurement, equipped with three core socket interface, no temperature compensation design.
Non-contact Sensor to reduce measurement drift, conductivity Measurement range of 0-10000 μS/cm, temperature accuracy of 0.1 ℃, support up to 3 years of battery life and 70 Meters water depth working environment.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Glass shell enhances corrosion resistance, simplifies operation without reference solution, Measurement range 0-200.0mS/cm, Suitable for High Accuracy conductivity detection of corrosion media, supports online monitoring and laboratory applications.
