Using quartz Glass material, the distillation process does not contact with metal to ensure the mass of pure water; Heating power 3000W, water output of 2500ml/h, suitable for experimental preparatory secondary distillation water.
Measurement range 0-500.0mN/m, accuracy 0.01mN/m, equipped with quartz glass strong acid and alkali resistance, automatic zero to maintain peak value, automatic calculation of Correction factor and average value, repeatability error is not greater than +/- 0.2%.
Equipped with quartz glass, suitable for strong acid and alkali solution testing, Measurement range 0-200mN/m, Accuracy 0.01mN/m, automatic zero adjustment, peak holding and result calculation, repeatability error is not greater than +/- 0.2%.
Using quartz time base technology to ensure accurate measurement, Maximum Measured value 750N, Real-time display of tension data and support for voice prompts, automatic storage of upper and lower limit setting values, providing USB, RS-232 and Bluetooth Data output methods.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and achieve complete gas-liquid separation; the output of pure water is 800-1000ml/hour, and the Heating power is 1500-2000W to ensure that no heavy metals are detected.
Using memory metal alloy material, temperature measurement range -20~ 50 ℃, humidity measurement range 0~ 99% RH, aging resistance and accurate Measurement, suitable for a variety of environment monitoring needs.
Measurement accuracy is ensured by memory metal alloy material, temperature range -10~ 40 ℃ error +/- 1.5 ℃, humidity range 10~ 90% RH error +/- 5%, aging resistant design to extend service life.
Optical inspection grade quartz containers for measurement of liquids, slurries, powders and fine particles simplify the Sample Handling process and improve measurement efficiency.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Four 25 ° inclined quartz Glass baffles are used to guide the powder flow and are equipped with a 25 +/- 0.05ml standard cylindrical Cup to achieve a loose powder state through natural gravity, ensuring the accuracy and Repeatability of density testing.
Heating temperature up to 1200 ℃, temperature control accuracy +/- 1 ℃, support 10 program temperature control, equipped with vacuum flange and digital pressure monitoring, Operating interface is simple and easy to use, non-professionals can quickly master.
Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Support 0-3000um Coating thickness adjustment, travel speed 0-5m/min, Oven temperature 40-150 ℃; Modular head can switch extrusion, Drawdown blade and other Spreader functions, integrated tension closed-loop control and infrared drying options.
