CCD camera system to achieve 1280 × 1024 resolution image analysis, support 0~ 180 ° contact angle and 0~ 400mN/m surface tension measurement, with dynamic contact angle analysis and solid surface energy estimation function.
Using injection defined bottom surface method for measurement, the funnel outlet has a diaMeter of Φ 5mm and a taper of 60 ° +/- 0.5 °, which can accurately measure the acute angle between the inclined surface of dust accumulation and the horizontal one.
The static drop method, droplet method and inclined plate method are used for measurement of dynamic contact angle, with automatic sampling, automatic surface tension analysis and automatic contact angle analysis functions. Degree of automation is high and Measurement accuracy is high.
Baseline and droplet contours are automatically recognized by machine vision, and contact angles are calculated based on Laplace equation quadratic Linear dispersion fitting. Measurement range is 0-180 °, accuracy is 0.1 °, and dynamic contact angle measurement and surface energy calculation are supported.
Measurement accuracy of +/- 0.1 ° and angle resolution of 0.001 ° with SONY high-speed industrial-grade chip and 0.7-4 zoom Microscope head. Measurement modes such as seat drop method, forward angle and backward angle are supported, and 2 million test records can be stored.
Equipped with 8 Measurement Angles and 6 light sources, the measurement of flicker, color flash and granularity, Color Repeatability up to 0.03Delta E * ab, high surface Measurement accuracy, suitable for special finish characterization.
Single angle 60 ° measurement, Stability 0.4GU, Repeatability 0.5GU, Automatic calibration without manual operation, can store 254 sets of data, lightweight and portable design.
With a fully automatic liquid inlet device, the liquid inlet accuracy reaches 0.001 μL, equipped with SONY high-speed industrial-grade chip and a variety of Measuring methods, it can accurately measure 0-180 ° contact angle and 0-3000mN/m surface tension to meet various material surface performance analysis requirements.
Double step motor control titration system, accuracy of 0.01 μl, equipped with 0.7-4 times continuous zoom Microscope and dense LED backlight Illuminant, support dynamic test forward angle, backward angle and surface tension measurement by hanging drop method, test range 0-180 °.
Using 12 Measurement Angles and industrial-grade MCUs, the measurement time is about 1 second/angle, the repeatability is up to 0.02Delta E * ab, and it supports Multi-ParaMeter measurement such as scintillation, color flash, and granularity. Measurement accuracy is high.
Measurement accuracy of +/- 0.1 °, support for dynamic contact angle analysis, equipped with High Accuracy Optical inspection swirl/spin table and 3 million pixel camera, can handle powder and superhydrophobic materials, database storage 2 million records.
Equipped with 3 Measurement Angles and 256 pixel dual array CMOS image sensors, the measurement wavelength range is 400~ 700nm, with High Accuracy and Stability in surface measurement, suitable for the evaluation of complex special effects Color.
The injection limited bottom surface method is used to directly measure the angle of repose, the funnel taper is 60 ° +/- 0.5 °, and the outflow diaMeter is 5mm, which is suitable for powder flowability analysis of different particle sizes and shapes.
Image analysis method, support high temperature sample testing, camera resolution of 1280 × 1024, with dynamic contact angle analysis and surface energy estimation function, Measurement range 0~ 180 °, accuracy 0.01 °.
Sample injector accuracy of 0.01uL, support the surface tension analysis and secondary Linear dispersion fitting contact angle measurement, Measurement range 0-180 ° accuracy 0.1 °, with video recording and dynamic process analysis function.
