Overview
The Defelsko PosiTector BHI1 hardness gauge is a Portable digital hardness testing device designed for the measurement of Hardness in soft metals (e.g. aluminium, aluminium alloys, copper, brass) and Miscellaneous materials (e.g. hard plastics and fibre reinforced plastics). It features an easy-to-read digital display, is lightweight and portable, can be used in any direction, and provides connectivity to PosiSoft software.
Features
1. Easy-to-read digital display
2. Compatible with 934-1 Barcol hardness gauge
3. Lightweight and portable, can be used in any direction
4. PosiTector is an interchangeable platform that supports multiple Probe conversions
5. USB, WiFi and Bluetooth connectivity with PosiSoft PC, Mac and Smartphone software
6. User Adjustable Measurement time, Screen Countdown
7. Includes spare field replaceable indenter with spare tools
8. RESET function can immediately restore factory settings
9. Weatherproof design, resistant to solvents, acids, oils, water and dust
10. Includes shock-absorbing protective rubber leather case and hard-shell portable bag.
11. Instrument Body and Probe Two Year Warranty
12. Includes long version calibrated certificate
13. Hi-RES mode can improve Display resolution
14. Includes hard and soft aluminum alloy test discs and calibration plates
15.1 point and 2 point calibrated options with Cal Reset
16. Selectable display languages
17. High contrast ratio LCD with backlit display
18. Flip the display to achieve front-up viewing
19. Use alkaline batteries or rechargeable batteries (built-in charger)
20. Continuous Display/Update of Average, Standard Deviation, Min/Max Hardness and Readings
21. Screen capture function to save screen images
22. HiLo alarms, audible and visible when Measured values exceed user specified limits
23. sealing USB port for continuous power supply
24. PosiSoft USB Drive for accessing stored data without software
25. Software updates over the network
26. Each stored measurement is marked with a date and time
Principle
The PosiTector BHI1 hardness gauge applies pressure to the surface of the material through the indenter, measuring its Hardness value and displaying it in Barcol units. The device uses digital technology to ensure High Accuracy and Reliability, in line with international standards such as ASTM B648/D2583. It supports multiple calibrate options and Hi-RES mode to optimize Measurement accuracy for different application scenarios.
Applications
Aluminium production, forgings, castings, material inspection, FRP/GRP-fibre and fiberglass reinforced plastics, Duro or hard thermoplastics, degree of curing of composites
Standards
ASTM B648/D2583、DIN EN 59、AS/NZS 3572.22
Steps
1. Turn on the device power supply
2. Select Measurement mode (e.g. Hi-RES mode)
3. Align the Probe indenter to the surface of the test material
4. Apply pressure for measurement and observe the screen countdown
5. Read and record Hardness values
6. Monitor measurement results with HiLo alarm function
7. Connect PosiSoft software via USB, WiFi or Bluetooth for data management
8. To calibrate if necessary, use the 1 point or 2 point calibrate option
9. Save measurement data, including date and time stamps
Notice
• Make sure the equipment is calibrated correctly before use, refer to the calibrating certificate
• Avoid prolonged use in extreme environments such as high temperatures or corrosive substances
• Regularly check the indenter and tools to ensure no damage
• Keep Probe vertical during measurement to avoid tilt affecting accuracy
• Pay attention to backup when storing data to prevent loss
• Follow safe charging guidelines when using alkaline or rechargeable batteries
• Ensure stable network connection when software is updated
• Pay attention to the HiLo alarm prompt when measuring outside the user-specified limit
