Overview
The HZLB MJX-150A mildew incubator is a 150L dedicated foster device with a large-screen LCD program control, Temperature range 0-65 ° C, Temperature Fluctuation +/- 0.5 ° C. The device can optionally be equipped with Humidity control function (40-95% RH) and a built-in UV mold lamp sterilization system, which is suitable for fostering microorganisms such as molds.
Features
1. Large-screen LCD program control, one-screen display of multiple sets of data, simple operation, accurate control, with blue backlight.
2. It can visually display the operation process, set temperature, temperature in the box, remaining time of the operation period, Ambient Temperature and protection temperature.
3. 1-99 time slots can be set, with a time range of 1-999 hours for each time period, to achieve automatic conversion.
4. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power when it exceeds the temperature to protect the sample.
5. With Ultra Temperature Sensor Abnormal Protection Function.
6. UV mold lamp sterilization system.
7. The liner is made of stainless steel.
8. With power-down memory and power-down time automatic compensation function.
9. With Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function.
10. Optional ultra-high temperature and ultra-low temperature remote APP early warning function.
11. Optional data network extraction function, transmit data to the network through GPRS, support computer to view, download, print and analyze data Linear dispersion.
12. Optional mobile app to view data, Linear dispersion and set alarms.
Principle
The mildew incubator drives the heating, cooling (Compressor intermittent operation) and humidification (optional) systems through the program controller to set the required temperature (and optional Humidity) parameters, so that the environment in the box meets and maintains the set conditions. Its built-in UV mold lamp provides sterilization function, and the system monitors the temperature in the box, Ambient Temperature and protection temperature in real time through multiple sensors to ensure stable operation and sample safety.
Applications
Microbial fostering, mold fostering, plant growth research, disease resistance research
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required temperature, time period and other program parameters through the large-screen LCD controller.
3. (If optional Humidity function) Set the required Humidity parameters.
4. (Optional) Enable the UV sterilization lamp as required.
5. Start the device and start running the foster program.
6. Monitor the running status and data through the screen or optional APP/network functions.
Notice
* Power supply voltage meets the requirements (220V +/- 22V, 50Hz +/- 0.5Hz).
* Equipment should be placed in a smooth, well-ventilated environment.
* Set the liner protection temperature to prevent damage to the sample from overheating.
* Device power to ensure that the power supply line load is sufficient.
Before performing maintenance or cleaning, be sure to disconnect the power supply.
* If the remote alarm function is optional, it is necessary to ensure that the network connection is normal.
* Humidification function is optional, please confirm the device model configuration before use.
