Overview
The HZLB MJX-150B mildew incubator is a 150L laboratory device with a large screen LCD program control for intuitive and precise operation. The device is mainly used to provide a constant temperature and Humidity environment, suitable for the fostering of microorganisms such as molds. The liner is made of stainless steel and can be optionally equipped with Humidity control function.
Features
1. Large-screen LCD program control, one-screen display of multiple sets of data, simple operation, accurate control, with blue backlight.
2. Intuitively display the operation process, set temperature, temperature in the box, remaining time of the operation period, Ambient Temperature and protection temperature.
3. 1-99 time slots can be set, with a time range of 1-999 hours for each time period, to achieve automatic conversion.
4. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power when it exceeds the temperature to protect the sample.
5. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
6. Contains ultraviolet mold lamp sterilization system, which is conducive to plant growth and improves disease resistance.
7. Full liner stainless steel material.
8. With power-down memory and automatic compensation function for power-down time, the original working state can be continued after power failure.
9. Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function, easy failure analysis and elimination.
10. Optional ultra-high temperature and ultra-low temperature remote warning and APP alarm function.
11. Optional climate box internal data network extraction, GPRS transmission, computer/mobile app view data Linear dispersion and set alarm function.
Principle
The mildew incubator sets the required temperature (and optional Humidity) parameters through the program controller, and the Control system drives the heating, cooling (Compressor intermittent operation) and optional humidification device to maintain the constant environment in the box. The built-in Sensor monitors the temperature in the box in real time and ensures the control accuracy through feedback adjustment. At the same time, the equipment is equipped with UV Lamp for sterilization and has multiple Safety protection mechanisms.
Applications
Microbial foster, plant foster, scientific research, laboratory
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required program parameters such as temperature, Humidity (if optional) and running time through the large-screen LCD control panel.
3. Confirm safety settings such as liner protection temperature.
4. Start the device, the system starts running and displays real-time parameters.
5. After the operation is over or when it needs to be interrupted, shut down the device according to the procedures.
Notice
* Power supply voltage meets the requirements (220V +/- 22V, 50Hz +/- 0.5Hz).
* Pay attention to the working environment of the equipment to ensure good ventilation.
* Set liner protection temperature to prevent sample overheating.
* When working with UV Lamp, avoid direct gaze and protect if necessary.
Regularly check the humidifier water tank (if optional) to ensure sufficient water supply.
* Sensor failure and other alarms should be checked in time.
* Optional remote functions require network configuration and use according to instructions.
When cleaning and maintaining, please disconnect the power supply.
