Overview
HNJ-1 digital torque meter is a Handheld torque measuring instrument produced by HBO, which is mainly used to detect the tightness of workpieces and the torsional performance of components. It adopts a locking drill chuck design to hold rod or short workpieces. The instrument adopts electronic Sensor technology, which has the advantages of high accuracy, easy operation, reliable data, and is equipped with special host computer software to realize data storage, analysis, export, query and printing functions.
Features
1. High Accuracy, high resolution, high stability, sampling speed 100HZ
2. Special Instrument Toolbox with EVA Shockproof Encasement, easy to transport, store and carry
3. Segment LCD display, green backlight screen
4. Three units N.m, kgf.cm, lbf.in automatic conversion
5. Test direction display (counterclockwise +, clockwise -)
6. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
7. Can set the upper and lower limit comparison value to make data qualified judgment, with sound alarm and level signal output
8. Store 99 sets of test data, automatically calculate the average, MAX Maximum and MIN Minimum
9. Peak hold time can be set (0 to 99 seconds)
10. Gravity acceleration value can be set
11. Automatic shutdown without operation can be set (0~ 99 minutes)
12. Smart charging, safe charging and extended battery life
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: automatically judge the qualification rate according to the preset standard value range
16. Automatic storage: Test data and Linear dispersion are automatically stored to the computer, and the number of storage is unlimited
17. Test data: Query and export in excel format
18. Test report: prepared and printed according to user requirements
Principle
The torsion meter uses electronic Sensor technology for torque measurement, and collects torque data in real time by clamping the workpiece with a locking drill chuck. The instrument ensures measurement accuracy through High Accuracy Sensor and 100Hz sampling frequency, and implements data analytics and processing with the host computer software.
Applications
Mass inspection, physical experiment, engineering test
Steps
1. Clamp the workpiece in the locking chuck
2. Select test mode (real-time torque tracking, peak hold or first peak mode)
3. Set parameters such as unit, upper and lower limit comparison value, peak retention time, etc
4. Perform torque test operation
5. View the display data or connect to the host computer software for data analytics
6. Save or export test data
Notice
• operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃ -70 ℃
• relative humidity should be kept at 15% -80%
• The working environment needs no vibration and corrosive medium around
• Power frequency AC 220V 50HZ
• The clamping range is limited to φ 1.5-φ 10mm workpieces
• Please confirm that the instrument has sufficient power before use
