Overview
The TAISITE MFLC-3/13D ceramic muffle furnace is a laboratory heating device with a maximum Operating temperature of 1300 ° C. It features an all-in-one lightweight and compact design with a vacuum-formed polycrystalline mullite fiber furnace, combined with a High Accuracy microcomputer temperature controller and S-type Thermocouple for precise temperature control.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Adopt a parallel side open furnace door design to keep the hot end away from the operator.
4. It has the safety function of opening the door and power failure, and restarting the power delay.
5. Double shell air insulation structure, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with Precision Sensor for Accurate Temperature Control.
8. Set the temperature through a dedicated function key, making it easy to operate.
9. With auxiliary menu, it can realize over-rise alarm, deviation correction, menu locking, over-rise prevention and other functions.
10. Multiple safety designs, including over-lift alarm, menu lock, over-lift prevention, power failure when opening the door, and delay when restarting.
Principle
The muffle furnace adopts microcomputer PID Control mode, monitors the furnace temperature in real time through S-type Thermocouple Sensor, and transmits the signal to the temperature controller. The temperature controller precisely adjusts the Power output of the silicon carbide heating element through the PID algorithm according to the deviation of the set value and the actual value, so as to realize the precise control and stability of the furnace temperature.
Applications
Laboratory heating, sample ashing, material heat treatment, high temperature experiment
Steps
Connect the power supply to ensure that the voltage meets the requirements of AC220V.
2. Set parameters such as target temperature and time by tapping the five buttons.
3. Start the equipment to start heating operation.
4. After the experiment, open the door to take out the sample after the furnace body is chilled down.
Notice
• Before use, please confirm that the Power supply voltage is consistent with the equipment requirements.
• When the equipment is running and just after it is finished, the temperature of the furnace body is very high, do not touch it, and beware of burns.
• When opening the door, the device will automatically power off. After closing the furnace door, it will take a delay to power back. Please pay attention to operation safety.
• Do not use more than the maximum temperature of the device is 1300 ° C.
• The equipment is equipped with a vent, please ensure that it is unobstructed to facilitate processes such as ashing.
• Please perform temperature correction regularly to ensure temperature control accuracy.
Equipment is protected against overcurrent and leakage, but it is still necessary to ensure good grounding.
• Before moving or cleaning equipment, be sure to disconnect the power and wait for it to chill down completely.
