Overview
TAISITE MFLC-3/13P ceramic muffle furnace is a laboratory high temperature equipment with integrated design, the maximum temperature can reach 1300 ℃, Temperature range is 300~ 1300 ℃. The product adopts vacuum forming polycrystalline mullite fiber furnace, combined with microcomputer PID program temperature control system, with fast heating, high temperature control accuracy and good thermal insulation effect.
Features
1. Integrated design, lightweight and compact structure.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation structure, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with S-type Thermocouple Precision Sensor, the temperature control accuracy reaches +/- 1 ℃.
8. Set the temperature through a dedicated function key, making it easy to operate.
9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock, over-rise preventer and other functions.
10. High security, with multiple protections such as over-lift alarm, menu locking, over-lift prevention, power failure when opening the door, and delay in restarting.
Principle
The ceramic muffle furnace generates heat through silicon carbide heating elements, and the furnace is made of polycrystalline mullite fiber material, which effectively reduces heat loss. The temperature control system adopts microcomputer PID control technology to monitor the temperature in the furnace in real time through S-type Thermocouple, and feed back the signal to the controller. The controller precisely adjusts the Heating power according to the setting program, so as to realize fast and stable heating and accurate temperature control.
Applications
Material sintering, ashing experiment, heat treatment, laboratory high temperature treatment
Steps
1. Turn on the power supply and turn on the power switch of the device.
2. Set the target temperature, heating program or timing time by tapping the button.
3. After confirming that the parameters are correct, start the heating procedure.
4. The equipment runs automatically according to the setting program, and enters the thermostatic state after reaching the set temperature.
5. After the experiment, wait for the furnace temperature to naturally chill down or cool down according to the program.
6. Turn off the power switch.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Wear protective gear during operation to avoid burns.
• When opening the door, the device will automatically power off. After closing the furnace door, it will take a delay to power back. Please pay attention to safety.
• Do not heat flammable, explosive or toxic gases in the furnace.
• Regularly inspect power cords and electrical components to ensure safety.
• When the equipment is running, do not touch the high temperature part of the furnace body.
• Program settings and parameter modifications should be made after understanding the functions, and the menu can be locked to prevent misoperation if necessary.
• When not in use for a long time, please disconnect the power supply.
