Overview
TAISITE MFLC-3/13T ceramic muffle furnace is a laboratory high temperature equipment with an all-in-one lightweight and compact design. It uses a vacuum-formed polycrystalline mullite fiber furnace for effective heat preservation. Operating temperature can reach 1300 ° C, temperature control accuracy is +/- 1 ° C, and equipped with a 7-inch color Touchscreen program temperature controller, which supports setting and program operation.
Features
1. Integrated lightweight and compact design.
2. Vacuum forming polycrystalline mullite fiber furnace, good thermal insulation effect.
3. Parallel side open furnace door design keeps the hot end away from the operator.
4. Equipped with safety functions such as door opening and power failure, reset delay, etc.
5. Double shell air insulation, low surface temperature.
6. An exhaust device is provided to facilitate sample ashing.
7. High Accuracy Microcomputer Temperature Controller Combined with S-type Thermocouple for accurate temperature control.
8. Using a 7-inch color Touchscreen, set parameters by tapping the finger.
9. With real-time Linear dispersion recording, U disk data export, correction, gating and other auxiliary features.
10. Multiple safety designs: over-lift alarm, menu lock, over-lift prevention, door opening and power failure, power-back delay, over-current and leakage protection.
Principle
The muffle furnace uses silicon carbide rods as heating elements, and precisely adjusts the Heating power through a microcomputer PID Control system. S-type Thermocouple monitors the furnace temperature in real time and feeds it back to a 7-inch color Touchscreen thermostat. The thermostat performs PID operations according to the setting program or fixed value to control the on-off and Power of the heating elements, so as to achieve accurate control and program lifting of the temperature in the furnace.
Applications
Material sintering, ash determination, heat treatment, laboratory high temperature experiment
Standards
The information does not mention the specific standards met.
Steps
Connect the power supply (AC220V/13.6A 50/60Hz).
2. Set the target temperature or select the preset program by tapping the 7-inch color Touchscreen.
3. Set parameters such as timing time (0 to 999.9 hours).
4. Start running, and the device starts to heat up according to the setting program or set value.
5. Linear dispersion can be observed in real time through Touchscreen during the experiment.
6. After the experiment is completed, the data can be exported to the USB flash drive.
7. After the furnace body is chilled down, clean it up.
Notice
Equipment needs to be operated by professionals and grounded properly.
• The furnace body is at high temperature, and protective equipment needs to be worn during operation to avoid burns.
• When opening the door, the device will automatically power off. After closing the furnace door, it will take a delay to power back. Please pay attention to the safety tips.
• Do not heat flammable, explosive or toxic gases in the furnace.
• When using the exhaust device, ensure that it is well ventilated.
• Regularly check whether safety devices such as overcurrent and leakage protection switches are normal.
• Before moving or cleaning equipment, be sure to cut off the power and wait for the furnace body to completely chill down.
• Do not use more than the maximum temperature of the device is 1300 ° C.
• Pay attention to the equipment power specification (AC220V/13.6A) to avoid overload.
