Overview
The YH1200 haze meter (universal type) can easily implement ASTM D1003 non-compensation method and ISO 13468 compensation method for full light transmitance and haze testing. Open sample compartment supports vertical and horizontal testing to accommodate more samples under test. Using PD array detector, to meet the CIE V (lambda) 2 degree visual Response, compensation method can realize High Accuracy and repeability light transmitter and haze data measurement.
Features
1. Dual-standard ISO & ASTM to meet the testing standards of different users
2, easy to operate, faster and more accurate measurement, large size touch screen, PD array detector, USB data output device can be docked with the laboratory system
3. Dynamic measurement, Illuminant detectors and temperature sensors monitor Illuminant and environment changes at all times to ensure reliable test data
4. With compensation port, it meets ASTM D1003 non-compensation method and ISO 13468 compensation method, providing more accurate test results
5, easy measurement, wide sample adaptation, open measurement area can be vertical, horizontal test, adapt to more tested samples
6. Quality management software, providing powerful haze and light transmitance measurement and analysis software, suitable for quality monitoring and data tabular management in various industries
Principle
The YH1200 hazy meter adopts transmission illumination mode 0/D (parallel light illumination, diffuse reflection reception), uses φ 154mm integrating sphere and 400~ 700nm combined LED Illuminant. The PD array detector meets the CIE V (lambda) 2 degree visual Response, and realizes High Accuracy and repeatability of light transmitter and hazy measurement.
Applications
Glass Processing, Plastic Processing, Film, Display Processing, Encasement Industry, Liquid Liquid Analysis
Standards
ASTM D1003/1044、ISO 13468、ISO 14782、GB/T 2410、JJF 1303-2011、CIE 15.2、JIS K7105、JIS K7361、JIS K 7136
Steps
1. Instrument preheating correction
2. Select the test standard (ASTM D1003 non-compensation method or ISO 13468 compensation method)
3. Place the sample in the open sample compartment (support vertical or horizontal)
4, start the measurement, about 1.5 seconds to complete the test
5. View pass/fail results through Touchscreen
6. Use the USB interface to output data or connect to quality management software
Notice
• Temperature range from 0 to 40 ° C (32 to 104 ° F)
• Storage Temperature range -20~ 50 ° C (-4~ 122 ° F)
• Sample thickness should be less than 170mm
• Measurement accuracy after instrument preheating calibration
• Power supply with DC 24V, 3A Power Adapter
Periodic inspection of Illuminant life (5 years greater than 3 million measurements)
