Overview
HUXI LCD Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts self-locking chuck and self-developed Cube lifting and fixing clip. The product is capable of high load and long-term continuous work, and has the automatic protection function of overload and abnormal conditions to ensure laboratory safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, automatically cut off the circuit and alarm in the event of overload, short circuit or abnormality
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod
6. The torque can be automatically adjusted according to the change of sample viscosity, which is convenient for experimental operation
7. Multiple Impellers and Bracket Available
Principle
The Stirrer uses a brushless DC motor to drive the Impeller swirl/spin to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect. In the event of overload, short circuit or abnormal situation, the system will automatically cut off the circuit and alarm to ensure the safety of the experiment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller Type and Size
2. Install the stirring rod into the self-locking chuck to fix it
3. Rotation speed and Working time set by LCD screen
4. Start the equipment and start the mixing operation
5. Working time can be fine-tuned as needed during the working process
6. Turn off the device after the experiment
Notice
• Power supply voltage within 100-240VAC range before use
• Operating Ambient Temperature should be maintained between 5-40 ° C
• The relative humidity should not exceed 80%
• Pay attention to the installation position of the Impeller to ensure that it is firmly fixed
• The device will automatically stop when there is an overload or abnormality, please check the reason before using it.
• Regularly check the integrity of the chuck protective cover and non-slip pad
• Select the appropriate Impeller type based on sample viscosity
• Do not use under conditions exceeding the maximum viscosity of 50000mPa · s
