Overview
HUXI LCD top-mounted Stirrer (model RWD100/20030074/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts LCD display and self-locking chuck design, which is more high-end safety than LED series. It can handle high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the Right Impeller and Install
2. Adjust the installation position of the stirring rod
3. Rotation speed and Working time
4. Start the device for mixing operation
5. Monitor operating status and fine-tune parameters if necessary
Notice
• Check whether the Power supply voltage meets the requirements of 100-240VAC before use
• Ensure that the Ambient Temperature is within the range of 5-40 ° C
• The relative humidity should not exceed 80%
• The clamping diameter range is controlled at 0.5~ 10mm
• Pay attention to the operation status of the equipment and deal with any abnormalities in a timely manner
• Regularly check the integrity of the chuck protective cover and non-slip pad
