Overview
COMBESTAIR BW1501 is an oil-free piston air Compressor with an exhaust pressure of 8Bar (0.8MPa), an exhaust volume of 300L/min at 0MPa and 145L/min at 0.7MPa. Equipped with a 50L gas tank, the noise value is 62dB (A), Dimension is 420 * 420 * 850mm, weight 46.5Kg, Power 1.5KW.
Features
1. Oil-free design to avoid oil pollution; 2. Piston compression method, efficient and stable; 3. Exhaust pressure up to 8Bar to meet a variety of application requirements; 4. Low noise operation, only 62dB (A); 5. Optional oil-water separator, automatic drain and internal rust prevention treatment of gas storage tank; 6. Multiple power options: 220-230V/50/60Hz, 100-120V/50/60Hz, 380-440V/50Hz.
Principle
When the motor is running, the air enters the Compressor cylinder through the air inlet muffler Filter. The Compressor compresses the air. The compressed gas opens the check valve through the airflow pipe and enters the air storage tank. The pressure gauge pointer rises to 8Bar. When the pressure is greater than 8Bar, the pressure switch automatically closes after sensing the pressure, and the motor stops working. At the same time, the solenoid valve quickly drains the air pressure in the Compressor cylinder to 0. The pressure in the air storage tank is maintained at 8Bar, and the gas is vented through the pneumatic valve to drive the connected equipment to work. When the air pressure in the air storage tank drops to 5Bar (6Bar optional), the pressure switch automatically turns on, the motor runs, and the Compressor starts working again.
Applications
Industrial manufacturing, pneumatic tool drives, automation equipment, lame plating operations, cleaning equipment
Standards
No specific criteria are mentioned
Steps
1. Connect the power supply and ensure that the voltage matches; 2. Open the pneumatic valve; 3. Start the motor and the Compressor starts to work; 4. Automatic stop when the pressure reaches 8Bar; 5. When using the equipment, the gas is discharged from the gas storage tank; 6. Automatic restart when the pressure drops to 5Bar (6Bar optional).
Notice
• Ensure that there is no pressure in the gas tank when draining; • It is recommended to replace the air inlet Filter every six months; • The safety valve automatically opens the exhaust pressure when the pressure exceeds 8.8 Bar; • Set the pressure switch start/stop pressure according to customer requirements; • Check whether all accessories are in good condition before use.
