Overview
SC1008 one-button fast measurement instrument is IPRE brand High Accuracy automatic measurement equipment, using high definition 20 million pixel CCD image Sensor and double-sided telecentric lens, combined with Gige Gigabit Ethernet transmission technology, to achieve fast and accurate non-contact measurement. The instrument does not need to locate workpieces and fixtures, supports simultaneous identification and measurement of multiple workpieces, and is widely used in the field of industrial precision inspection.
Features
1. Automatic image registration function, no need to locate the workpiece and fixture, the product can be automatically recognized and measured arbitrarily
2. Can simultaneously identify multiple measurement workpieces and perform measurement output results
3. Using 20 million pixel high definition CCD Image Sensor, with Gige Gigabit Ethernet network interface card, transmission rate of 1G/S, clear imagery image quality
4. Equipped with bilateral telecentric lenses, with parallel telecentric transmitted light, programmable four-zone annular shadowless falling light, coaxial falling light and low-angle shadowless falling light and other lighting systems
5. Simple programming, through surface compensation calibration, the repeability accuracy can reach 0.001mm, Measurement accuracy is guaranteed < 0.005mm
6. Powerful measurement function, support basic measurement such as line drawing, distance, angle, radius and diameter, as well as advanced functions such as highest point, intersection, contour scanning, electronic caliper, area and contour
Principle
The instrument collects workpiece images through high definition 20 million pixel CCD image Sensor, and uses automatic image registration technology implementation of workpiece automatic identification and positioning. Combined with bilateral telecentric lenses and various lighting systems (transmitted light, falling light, etc.), to ensure clear and accurate imagery. The software system processes image data through surface compensation calibration algorithm to realize High Accuracy dimensional measurement and shape tolerance analysis.
Applications
Industrial precision testing, machinery manufacturing, electronic component measurement, mold testing, product quality control
Standards
SPC analysis standard
Steps
1. Connect the power supply and start the device
2. Place the workpiece arbitrarily on the measurement platform
3. Activate automatic image registration to identify artifacts
4. Select or call the corresponding measurement program
5. Perform measurement operations
6. View and export measurement results and SPC analysis reports
Notice
• The maximum weight of the workpiece to be tested shall not exceed 3kg
• Power supply voltage range AC100-240V 50/60Hz
• Camera voltage output rated load is below DC24V0.6A
• Face compensation calibration is required before use to ensure Measurement accuracy
• Regularly clean the lens and light source system to maintain imagery mass
• Pay attention to the temperature and humidity requirements of the working environment of the equipment during operation
