Overview
UF180 ultrasonic flaw detection (UFD) instrument is a device used to detect internal defects and foreign objects of materials under the IPRE brand. It uses ultrasonic principle to perform non-Destructiveness detection. The equipment is widely used in manufacturing, construction, aerospace, automotive and other fields to detect welding mass, internal corrosion of pipelines, crazing in steel components and other problems.
Features
1. Data collection: hardware real-time sampling, 10-bit AD converter, sampling speed 100M sps, waveform height fidelity, hardware interpolation up to 400M sps; detection methods include positive half-wave, negative half-wave, full-wave, RF detection; gate reading can be selected from single gate and double gate, support peak reading and edge detection in gate; gain range 0-110dB, minimum adjustment amount 0.2dB, with automatic gain adjustment and scan gain function.
2. Flaw detection function: peak memory real-time retrieval of the highest wave of defects and recording of MAX Maximum; defect positioning real-time display of level, depth, sound path position; defect quantification real-time display of equivalent dB value; defect qualitative through the echo envelope waveform to assist manual experience judgment.
3. Specifications: detection range 0~ 9999mm, operating frequency 0.25~ 20MHz, emission pulse is negative pulse, energy optional, pulse width 0.1~ 0.5μs continuous adjustment; probe damping optional 50Ω, 150Ω, 300Ω, 400Ω; dynamic range ≥ 36dB; digital suppression 0~ 95%; vertical Linearity ≤ 2.6%; horizontal Linearity ≤ 0.1%; resolution > 36dB; electrical noise level < 10%; filter band 0.25~ 20MHz, fully automatic matching; detection channel 200 groups; probe interface Q9-Q9; probe types include straight probe, oblique probe, dual crystal probe, penetration probe; power supply is DC 9V, lithium battery continuous work 6~ 8 hours; screen is 65K color 800 * 480 resolution high definition TFT liquid crystal, luminance 1500cd/m2; external dimensions 287x172x50mm.
Principle
UF180 ultrasonic flaw detection (UFD) instrument uses the principle of ultrasound for non-Destructiveness detection, by emitting ultrasonic waves into the material, when encountering defects or foreign objects, the ultrasonic waves will be reflected back to the device, the device receives and analyzes these echo signals, so as to detect and locate the defects inside the material.
Applications
Manufacturing, construction, aerospace, automotive
Steps
1. Connect the probe to the device interface.
2. Turn on the power and check the battery status.
3. Set the flaw detection channel and parameters according to the detection requirements, such as gain, detection mode, gate reading, etc.
4. Place the probe on the surface of the material to be tested and start scanning.
5. Observe the waveforms and readings displayed on the screen in real time and record defect information.
6. Analyze data using crest memory and defect location functions.
7. Turn off the device after completing the test.
Notice
• Ensure that the probe is firmly connected to the device interface to avoid signal interference.
• Check the battery level before operation to ensure continuous working hours.
• Correctly set parameters such as gain and filter band according to material type and detection requirements.
• Avoid use in extreme environment conditions to prevent equipment damage.
• Regularly calibrate equipment to ensure detection accuracy.
