Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Polygonal structure design, range 25~ 2032µm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 standards, suitable for Paints, varnish and other Coating wet film thickness measurement.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Support HDMI, WIFI and SD card three output, 1920 * 1080 resolution, can directly control camera paraMeters through USB mouse, embedded image capture and video recording, suitable for a variety of detection scenes.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The pressure range of the probe is 50~ 250N, the diaMeter of the rubber probe is 40mm, and the degree of paint film chalking is evaluated by comparing the imprint of the photo paper with the standard sample, which is suitable for the detection of various environmental factors.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Wet film thickness 25 microns, 304 stainless steel material and precision cold extrusion process, providing uniform Spreader effect, optional handle to reduce the operating burden.
303 stainless steel material wear and corrosion resistance, wet film thickness 25.1 μ m, wire-wound structure to ensure uniform film, suitable for a variety of liquid materials.
Wet film thickness 34.3 microns, using wire-wound design, wear and corrosion resistant stainless steel material, suitable for preparing specific thickness film, easy to detect hiding power and film Gloss.
Using photo paper smooth surface combination technology, observing the imprint after applying a uniform load, the pressure range of the probe is 50-250N, and the diaMeter of the rubber probe is Φ 40mm, which can accurately evaluate the chalking grade of the paint film.
The 4-sided paint design can be prepared with four different thickness wet-film, application width 75mm, accuracy +/- 3μm, corrosion-resistant stainless steel material, easy to clean and durable.
