Using diffuse transmission optical path design, optical density Measurement range 0.00-6 OD, light transmitance accuracy +/- 2%, can simultaneously measure light transmitance, absolute optical density, relative optical density and Dot area ratio.
Ceramic fiber Furnace to achieve multi-faceted heating, Temperature uniformity less than +/- 5 ℃, heating rate ≥ 10 ℃/min, with nitrogen filling device to slow down oxidation and flue discharge of harmful gases.
Width 2cm, optical path 10mm, dimensions 12.5 × 22.5 × 45mm, specially designed for Spectrophotometer matching Cuvette, to ensure Optical inspection detection accuracy.
The width is 3cm, the optical path is 10mm, and the dimensions are 12.5 × 32.5 × 45mm. As a special accessory for Spectrophotometer, it ensures the stability of the optical path and the accuracy of measurement.
Adopting frequency conversion stirring technology, the impeller Rotation speed can be adjusted from 1000-3600rpm, and supports two test modes of counting and not counting to ensure that the fiber retains its original structural properties during the wet dissociation process.
Pottery and porcelain fiber Furnace and multi-faceted heating technology, Temperature Fluctuation +/- 2 ℃, energy saving rate of 40%, with 30 program settings and over-temperature protection function.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
The samples were treated by acid-base cooking method, and 6 samples could be measured each time. The repeatability error of the absolute value of crude fiber content below 10% did not exceed 0.4%, and the determination time was about 100 minutes.
Ceramic fiber material, Temperature range, Temperature Fluctuation +/- 0.5 ℃, support multi-stage programmable control, independent temperature limit alarm system to ensure safe operation.
Pottery and porcelain fiber Furnace to achieve multi-faceted heating, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 programming and double over-temperature protection function.
Pottery and porcelain fiber Furnace and multi-faceted heating technology, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 programming and over-temperature protection function, energy saving rate of 40%.
Pottery and porcelain fiber Furnace and multi-sided heating technology, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 program programming and over-temperature protection function, significant energy saving.
The width is 5cm, the optical path is 10mm, and the dimensions are 12.5 × 52.5 × 45mm, which is suitable for the use of Spectrophotometer to ensure Optical inspection detection accuracy.
Using photoelectric detection and microcomputer servo system, high Sensitivity, minimum reading +/- 0.005 °, Repeatability ≤ 0.007 °, low optical rotation samples with measurable transmittance ≥ 10%, no reading error.
Pottery and porcelain fiber Furnace to achieve multi-sided heating, temperature uniformity +/- 2 ℃, 30 program control, heating rate 1-30 ℃/min adjustable, with over-temperature protection and automatic thermostatic function.
