Using industrial grade Sensor, Response Time T90 is less than 60 seconds, resolution up to 0.1ppm, with waterproof, dustproof and explosion-proof characteristics, round and durable shell, support sound and vibration alarm.
Using Industrial Sensor, Response Time T90 is less than 60 seconds, with waterproof, dustproof and explosion-proof characteristics, support sound, vibration and Light Emitting Diode multiple alarm indication, continuous Operating Time is not less than 8 hours.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Using MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds, support a variety of signal output and wireless transmission, with explosion-proof and explosion-proof structure to ensure safety and reliability.
Intrinsically safe explosion-proof design, up to CT4 grade, equipped with explosion-proof Sensor and display. Table size 410x510mm, weighing range 110kg, accuracy 10g, stable structure, support external calibrating and a variety of functions.
Using explosion-proof composite explosion-proof technology, pumping rate of 4L/S, noise only 63dB, equipped with gas ballast valve can remove a small amount of water vapor, safe and reliable for dangerous environment.
Modular design with low power consumption, intelligent Sensor detection technology, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, support for multiple signal output and wireless transmission.
Using explosion-proof composite explosion-proof technology, pumping rate 2L/S, noise as low as 63dB, equipped with gas ballast valve can extract a small amount of water vapor, safe and reliable.
Using explosion-proof composite explosion-proof technology, pumping rate 8L/S, noise as low as 66dB, equipped with gas ballast valve can extract a small amount of water vapor, suitable for flammable and explosive dangerous places.
Modular design with low power consumption, intelligent Sensor technology, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, Response Time ≤ 30S, support multiple signal output and remote alarm functions.
Electrochemical sensor and catalytic combustion technology, with 4~ 20mA and RS485 output, support infrared remote control debugging, range 50ppm, operating temperature -20~ 50 ℃, explosion-proof grade Ex d ⅱ C T6 Gb.
Adopting explosion-proof, burn-seal, intrinsically safe composite explosion-proof technology, with anti-suction valve and gas ballast valve, the pumping rate is 16m ³/h, the ultimate pressure is 0.005mbar, and the noise value is 58dB (A).
The use of explosion-proof composite explosion-proof technology to ensure safe operation, pumping rate of 15L/S and noise only 66dB, equipped with gas ballast valve can handle a small amount of water vapor, compact suitable for use in hazardous environments.
It adopts explosion-proof composite explosion-proof technology to ensure safe operation. It is equipped with an anti-suction valve to prevent oil from being sucked back. It is equipped with a gas ballast valve to adjust the Vacuum Level. The pumping rate is 24m ³/h, and the noise value is 58dB.
Using industrial grade Sensor, Response Time is less than 30 seconds, accuracy +/- 3% FS, with explosion-proof and explosion-proof shell design, support 4-20mA and RS485 output, adapt to -10~ 40 ℃ working environment, ensure reliable monitoring of various gas concentrations.
