Support simultaneous detection of 4 kinds of gases, integrated temperature and Humidity detection, Response Time T90 ≤ national standard, Protection Rating IP66, with Internet of Things remote monitoring and a variety of Installation methods.
With 130dB high gain and Automatic calibration function, support 100 independent flaw detection channels and 1000 waveform storage, Scanning range 0-10000mm, to meet the needs of a variety of material flaw detection.
With ten independent flaw detection channels, the gain range is 120dB, the frequency band is 0.4~ 20.0MHz, and it supports automatic generation of DAC Linear dispersion and 500 data storage for efficient defect identification.
Maximum support for simultaneous detection of 4 gases, integrated temperature and humidity detection, support for diffusion and pump sampling, remote paraMeter configuration and program upgrade functions, Response Time T90 ≤ national standard, Protection Rating IP66.
2000Hz repeability Frequency and 640 * 480 Display resolution, support unlimited video playback function, Automatic calibration of Probe paraMeters to improve detection accuracy, suitable for all kinds of workpiece defect identification.
Special sealing material is used to improve light avoidance, and the detection results are accurate and stable; the bottom detection design is not affected by the angle; the detection accuracy reaches 1X10-16mol ATP, the detection range is 0-9999 RLU, and the integrated portable box design.
With DAC Linear dispersion automatic generation function, transmission Frequency up to 1000Hz, support 6 Meters detection range and 10 independent flaw detection channels, real-time dynamic video recording and automatic measurement crazing depth.
Special sealing material is used to improve light protection, and the detection results are accurate and stable; the bottom detection design is not affected by the angle, and the data is reliable; the detection limit is less than or equal to 1.0 CFU/ml, and the repRoducibility is good, which is suitable for trace ATP analysis.
The special sealing material is used to improve the light protection, the detection accuracy reaches 1X10 ^ 15mol ATP, the bottom detection design ensures that the data is stable and not affected by the angle, and the integrated box portable design.
The 400MHz main frequency processor is used to realize intelligent analysis, the detection range is 0~ 15000mm, and it has the ability to find extremely small defects. It supports USB2.0 high-speed data transmission and a variety of probe types.
Support simultaneous detection of 4 gases, integrated temperature and Humidity detection, with Internet of Things remote monitoring function, Response Time T90 ≤ national standard, Protection Rating IP66, suitable for a variety of Installation methods.
Photocell, photovoltaic cell detection to ensure accurate and stable measurement, potassium and sodium detection limit of 0.004mmol/L and 0.008mmol/L, Response Time is less than 8 seconds, support lithium calcium detection function.
Equipped with 10 independent flaw detection channels and 110dB gain range, supports DAC Linear dispersion automatic generation and 500 data storage, adopts 5.5-inch EL flat screen display, weighs only 1.6kg and is easy to carry, and can work in -20 ℃~ 50 ℃ environment.
Using 0.5-2 μL micro-volume sample detection, the optical path accuracy is 0.001mm, the detection concentration is 50 times that of conventional equipment, and the sample recovery and 6-second rapid analysis are supported.
With 15 independent flaw detection channels and Automatic calibration function, the near-field blind area is small to meet the thin-walled tube detection, the working Frequency is 0.4MHz~ 15MHz, the Continuous Operating Time is more than 8 hours, and the waterproof, oil-proof and dust-proof design is supported.
