Using 60 degree stylus end design, radius 50μm, Measurement range 0~ 500μm, accuracy +/- (5μm + 5%), split Probe structure is easy to operate and maintain.
Built-in stylus design Measurement range 0~ 500 microns, can measure more than 50 readings per minute, equipped with tungsten carbide tip and aluminum oxide wear surface, with temperature compensation function and meet many international standards.
Measurement speed and lower power consumption with DSP chip control; 18 asperity paraMeters such as Ra and Rz can be measured; continuous working time exceeds 20 hours; built-in lithium-ion battery, storing 100 sets of data.
Measurement range 0-500μm, accuracy +/- (5μm + 5%), 60 degree stylus end angle and 50μm radius ensure accurate contact measurement.
Using DSP chip control, Measurement speed is fast and low power consumption; Vertical Measurement range up to 160μm, support more than 20 kinds of paraMeters such as Ra, Rz; Built-in lithium battery works continuously for more than 20 hours, storing 100 sets of data.
Using DSP chip control, Measurement speed is fast and low power consumption; Support Ra 0.025μm to 12.5μm, Rz 0.02μm to 160μm and other large-scale Multi-ParaMeters; Built-in lithium-ion battery works continuously for more than 20 hours, with automatic sleep and Data storage functions.
Measurement range 0~ 1500μm, accuracy +/- (5μm + 5%), stylus end angle of 60 degrees, suitable for surface profile measurement, with line design for easy connection.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Measurement range 0~ 500μm, stylus angle 60 degrees, can measure more than 50 readings per minute, with built-in temperature compensation and aluminum oxide wear surface design, in line with ASTM D4417 and other international standards.
Equipped with three anti-skid wheels and carbide stylus, horizontal movement of 12 test values, automatic statistics of time, date and position data, built-in Storage capacity 4000 values, compact portable one-handed operation.
Split structure design, Measurement range of 0~ 1500μm, accuracy +/- (5μm + 5%); aluminum oxide wear-resistant surface and tungsten carbide stylus, support 100000 reading storage and wireless data transmission function.
Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
Impact energy is only 2.7mJ, minimal damage to the measured surface, does not damage the hardened layer, suitable for testing 1mm thickness of small parts, Cedar diaMeter minimum 0.32mm.
Split Probe for easy access to narrow areas, Measurement speed over 50 readings per minute, Storage capacity 250 sets of data. The aluminum oxide wear surface and tungsten carbide stylus ensure long life, built-in temperature compensation to ensure accuracy.
The device moves the needle at a speed of 1.35mm/s, with a load range of up to 20N, which can evaluate the scratch resistance of coatings, and the voltMeter indicates substrate contact, supporting variable load testing.
