It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Adopting double roller structure, naming steel roller and rubber roller, the number of reticulated lines is 200 lines/inch, and the print width is 70mm, which can precisely control the film fineness and is suitable for testing of various materials.
Provide uniform ink speed three adjustable 450 to 800rpm, color development speed three adjustable 12 to 25rpm, color development pressure range -20 to 80, support ordinary or UV ink roller, improve work efficiency and applicability.
Using 180LPI metal anilox roller with 70mm print width, four pyramidal net hole structure to ensure the ink transfer evenly, the handle design in line with ergonomic operation labor-saving.
Driven by numerical control motor, swirl/spin accuracy of 0.1 degrees, support multi-color inks Hue, concentration detection, can anticipate dry and wet ink color change and Abrasion Resistance, 5-10 minutes rapid color development, significantly reduce inks waste.
It can display 45 × 210mm and 106 × 210mm color bars simultaneously, providing 450-800 rpm ink leveling speed and 1-120 seconds ink leveling time adjustable, with built-in pressure adjustment to ensure accurate and stable color.
Precise control of ink layer thickness, the minimum Basis Weight unit is 0.01CC, and the usage of Spot Color inks is predicted by calculation, which is suitable for ink contrast and color concentration detection.
Using 200LPI anilox roller and 70mm print width, metal anilox roller and rubber roller combination, the handle is made of stainless steel, suitable for a variety of inks Spreader and good sample repRoducibility.
Can accurately test whether the surface tension is up to standard, support ink Color and tip shape customization, suitable for a variety of printing composite process.
Can accurately test whether the material surface tension is up to standard, support custom ink Color and tip shape, suitable for Plastic film, metal foil and other materials detection.
It adopts 120-wire metal anilox roller with quadrilateral pyramid net hole structure, the print width is 70mm, and the precision Spreader is implemented through electronic engraving technology. The operation is simple and the proofing repRoducibility is good.
Using 250LPI anilox roller and 70mm print width, quadrilateral pyramid mesh structure to ensure film uniformity, through electronic engraving technology implementation of precise ink control, suitable for a variety of liquid Coating Spreader.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
