Provide 25, 40, 70, 100 four profile specifications, size 87x87x2.5mm, weight only 60 grams, Portable design is convenient for quick comparison and evaluation on site.
High-speed DSP processor is used to improve Measurement speed, support Ra0.05-10.0 μ m Measurement range, Sensor host integrated design is convenient for field use, and can measure the cone surface and groove of the outer circle.
DSP chip control, Measurement speed and low power consumption; Support 160μm large-range measurement, up to 320μm; Multi-ParaMeter measurement function, compatible with ISO, DIN, ANSI, JIS multiple national standards.
Small size only 106 * 70 * 24mm, weight 200 grams easy to carry; measurement of outer circle, cone, plane and groove, Indication Error ≤ +/- 15%, using piezoelectric crystal Sensor to ensure measurement Reliability.
It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
Measurement accuracy using DSP chip control, support 14 kinds of paraMeters including Ra, Rz, etc. Measurement range Ra 0.005μm~ 16.00μm, can store 100 sets of data, suitable for a variety of profiled surface detection.
Measurement speed and lower power consumption with DSP chip control; 18 asperity paraMeters such as Ra and Rz can be measured; continuous working time exceeds 20 hours; built-in lithium-ion battery, storing 100 sets of data.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
Using Inductance Measurement principle, equipped with diamond stylus, measurement radius of 10 microns, support USB and Bluetooth data transmission, with automatic shutdown function, Portable design is convenient for on-site use.
It can measure planar and cylindrical surface roughness, with a minimum diaMeter of 5mm and a maximum depth of 22mm, and supports a variety of Sensors to adapt to different workpiece shapes.
Ra measurement range of 0.05~ 10.0μm and Rz range of 0.1~ 50μm, support circular, cone, plane and groove measurement, using professional microprocessor and integrated circuit design.
Adopt Diamond Stylus Inductance Sensor, Measurement accuracy within +/- 15%, with RC, PC-RC, GAUSS, D-P four filtering methods, can store 7 sets of measurement data and support RS232 communication.
Simultaneous measurement of Ra, Rz, Rt, Rq four asperity paraMeters, with four filtering methods, stylus radius of 5 microns, support for a variety of Interface transmission, compact and portable.
It can measure the surface roughness of the hole with an aperture greater than 2mm, and the maximum depth is 9mm. It supports both flat and cylindrical measurement, and is suitable for a variety of special-shaped surface detection needs.
