The 90 ° right angle Probe design is suitable for low headroom area measurement, the fully waterproof structure supports underwater operation, the Measurement accuracy is +/- (0.05 mils + 1%), and the stainless steel sealing Probe ensures durability.
Using 2.0MHz Frequency Probe, Measurement range 2.0~ 400.0mm, dedicated to the thickness detection of coarse crystal materials such as cast iron, the lower limit of pipe measurement Φ 30 * 4mm.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Measurement range 0~ 625μm, accuracy +/- 1%, waterproof sealing structure suitable for underwater measurement, constant pressure Probe to ensure measurement Stability.
Detachable built-in Probe design, support one-handed operation, Measurement range 0~ 38mm, accuracy +/- 3%, minimum measurement surface 83 × 83mm, suitable for various surface Coating thickness measurement.
Measurement accuracy of +/- (0.05 mils + 1%) with 90 ° right angle design for low headroom area measurement, fully waterproof structure for underwater operation, stainless steel sealing Probe for durability.
Adopting the principle of magnetic Induction Thickness Measurement range 0~ 1250 microns, suitable for LEEB242 models, can be connected to the printer output data, suitable for nonmagnetic Coating thickness detection on magnetic metal substrates.
Measurement principle using magnetic method, thickness range 0-3000μm, error +/- 3%, with split Probe structure, support single and continuous Measurement mode, equipped with RS-232C interface.
Using 7.5MHz High Frequency Probe, Measurement range 0.7~ 50mm, suitable for thin-walled and small arc surface workpieces, the lower limit of pipe measurement is Φ 25 * 1.2mm, strong adaptability.
Adapted to 5500 and 9500 series Probe, using straight Probe design, providing stable connection and reliable data transmission, improving the efficiency of coating thickness measurement.
Detachable built-in Probe design, support one-handed operation, Measurement range 0-6000μm, accuracy +/- 1%, suitable for Coating thickness detection of various metal substrates.
90 degree Probe design for narrow space measurement, Measurement range 0~ 1500μm, accuracy +/- 1%, support Data storage and USB transmission, Protection Rating IP65, in line with ISO, ASTM and other international standards.
Detachable built-in Probe design, support one-handed operation, Measurement range 0~ 1500μm, accuracy +/- 1%, suitable for PosiTector series host, suitable for Coating thickness detection of various metal substrates.
Measurement thickness up to 63.5 mm, accuracy of +/- 3%, measurement of magnetic and nonmagnetic metal substrates on nonconductive coatings, equipped with braided stainless steel cable anti-torsion wear.
