LED Illuminant provides stable performance, with CAL CheckTM Adjustment, Measurement range 0~ 500 ppm CaCO3, accuracy +/- 5 ppm, suitable for seawater and freshwater alkalinity detection.
Measurement range 200-600ppm, accuracy +/- 6% reading, LED Illuminant 610nm, automatic shutdown function, suitable for seawater calcium Ion concentration detection.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Support conductivity, TDS, salinity and resistivity Multi-ParaMeter measurement, conductivity range 0.000 μS/cm to 1000mS/cm, with intelligent end point determination and automatic temperature compensation function.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Platinum ElectRode ensures fast and stable measurement, supports 1-3 point calibrating and automatic temperature compensation, salinity Measurement range 0-80ppt, conductivity covers 100μS/cm to 200mS/cm, with automatic end lock and fully waterproof design.
Using platinum sheet material, Conductivity Detector cell constant is 10, suitable for high conductivity environment water measurement, equipped with three core socket interface, no temperature compensation design.
Suitable for low conductivity water samples with conductivity above 100 µS/cm, using polymer liquid junction design, pH Measurement range 0-11pH, Temperature Measurement range 0-80 ℃, no need to add liquid reference system.
Using refractive index Measurement principle, automatic temperature compensation 0-40 ℃, Measurement time of about 1.5 seconds, only 100 μ L sample volume, support PSU, ppt and specific gravity three unit conversion, stainless steel sample Chamber corrosion resistance.
Measurement range 0-2μS/cm with Mini-DIN 8 core connector for accurate detection of low conductivity solutions.
Using Platinum Sensor to ensure linear stable measurement, Conductivity Detector cell constant K = 0.1, Glass shell corrosion resistance, suitable for 0~ 80 ℃ Operating temperature environment.
Conductivity Detector 111800μS/cm@25 ° C with a capacity of 500ml provides accurate and reliable measurement of Conductivity Detector values, ensuring instrument calibrate accuracy and repeatability.
Simultaneous measurement of conductivity, resistivity, TDS, salinity and temperature, support automatic temperature compensation and ElectRode diagnosis, Data storage 450 groups, with IP54 dustproof and waterproof rating, Measurement accuracy up to +/- 1.0% FS.
Non-contact Sensor with long life and two Measurement ranges (100 to 55000 μS/cm). The enclosure is made of Acetal Resin, which is resistant to seawater corrosion and supports monthly on-site calibrating for accuracy, with a maximum operating depth of 70 Meters.
Measurement range 0.00μS/cm~ 100mS/cm, error +/- 0.5% F. S, temperature compensation coefficient 2%, LED display is clear, Stability is high, suitable for accurate conductivity detection.
