The three-roll extrusion grinding principle is used to process materials with a viscosity of up to 3 million cps. The roller can control the temperature rise through chilled down water. The roller speed range is 23-178rpm. It supports the customization of ceramic materials such as zirconia and is suitable for paste grinding with high fineness requirements.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
Three rollers are used to squeeze each other and friction at different speeds to achieve grinding. The roller material is cold hard alloy cast iron, with surface Hardness HS70 ° or more, and the fineness of grinding can reach 15μm, which is suitable for high viscosity material processing.
Using nitrile rubber material, length 100mm diaMeter 20mm, with excellent oil resistance and aging performance, suitable for inks proofing operation.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support dry grinding, wet grinding and low temperature grinding, suitable for heat sensitive materials and minimal liquid nitrogen consumption.
The double Tank design is used to achieve high-throughput grinding, the vibration speed is adjustable from 60 to 1800rpm, and the discharge particle size is 5 to 10 μm. It supports dry grinding, wet grinding and low temperature grinding, and effectively protects the molecular structure of heat-sensitive materials.
With double Tank grinding and 1-30Hz vibration Frequency adjustment, support low temperature grinding protection heat sensitive material, discharge particle size up to 5~ 10μm, can process more than 10 samples at a time and grinding time only 1-3 minutes.
Using double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support low temperature grinding protection of heat sensitive materials, a processing of more than 10 samples, grinding time only 1-3 minutes.
Using large-screen touch screen operation, intelligent control of grinding time and speed, grinding results are highly repeatability. The dual-Tank design supports high-throughput processing, and the discharge particle size can reach 5~ 10 μm. It is suitable for heat-sensitive materials and consumes very little liquid nitrogen.
Roller diaMeter 65mm, processing capacity 0.5-10 kg/h, support chill down water temperature control, emergency brake protection, can be customized ceramic roller material, to adapt to viscosity ≤ 3,000,000cps material.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support low temperature grinding protection of heat sensitive materials, processing multiple samples at one time and high Repeatability.
Adopt Cr12 steel roll, Hardness reaches HRC52 °~ 58 °, Surface Hardness 0.2~ 0.1, easy to operate and easy to change color, suitable for fine grinding of material viscosity 30~ 8000cps range.
