Using reciprocating lame plating technology, the effective lame plating area of 160 × 80mm can be expanded to 200 × 100mm. Support 0.1-5 ml/min precision discharge control, with Vacuum chuck platform to ensure the substrate is flat. Integrated PLC and Touchscreen realize paraMeter preset and real-time monitoring.
The wet film thickness can be as low as 1.5 μm, the groove bottom is wider to provide greater Coating Weight, the chrome plating surface and extrusion process ensure durability and easy cleaning, avoiding the problem of traditional steel wire loosening.
With paint penetration measurement ability, accurate measurement of wall thickness without removing coatings, thickness range 2.5~ 125mm, accuracy +/- 0.03mm, support multi-echo and single-echo mode switching, suitable for detection needs of different surface conditions.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
The formed pRoduction process ensures stable structure, wet film thickness can be controlled to 100μm, chrome plating surface preparation improves Abrasion Resistance and ease of cleaning, and the effective application width reaches 500mm.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Frequency 5.0MHz, support paint layer detection and emission to echo mode, Measurement range 2~ 160mm, suitable for a variety of workpiece thickness measurement.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
The wet film thickness can be controlled to 1.5μm, the bottom of the groove is wider and the Coating Weight is larger, and the 304 stainless steel material and chrome-plated surface are used, which is durable and easy to clean, and avoids the problem of loose and broken wires.
Lame plating movement rate 1-300mm/s, accuracy +/- 1%, support maximum 600 * 300mm substrate, can spray thickness 0.01~ 13mm, with 1L stainless steel pressure bucket, 5 inch touch screen control, energy consumption is only 100W.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
With lame plating and scraping dual functions, Spreader speed 0-5m/min, Spreader width 100-300mm, integrated automatic tension control and correction system, support 0-200mm lame plating height adjustment to ensure coating uniformity and ease of operation.
