Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
High Accuracy modular Spreader station structure, Spreader thickness range of 0.01mm to 2mm, coating speed 2-4.5 m/min adjustable, support forward and reverse stepless variable speed and automatic winding, gap adjustment Graduation up to 0.001mm, easy to accurately control the Spreader process.
Coating speed 1~ 10m/min adjustable, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, equipped with infrared drying and air cooling system to achieve efficient Spreader and drying.
The independent control structure of the cold and hot box is adopted, with a temperature conversion time of less than 15 seconds and a temperature recovery time of less than 5 minutes. It is equipped with multiple safety interlock protection and standard lead hole design to ensure efficient and safe testing.
Can measure 50~ 200000mPa · s viscosity range, Temperature control accuracy of +/- 0.1 ℃, the use of high subdivision stepper motor to ensure smooth Rotation speed, support the whole process of monitoring viscosity - Linear dispersion, beyond the range of automatic alarm.
Adopting MCU to adjust power and temperature control mode, temperature control accuracy +/- 0.5 ℃, with eight standard test force, can meet the needs of different material testing, suitable for melt flow performance measurement at high temperature.
Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
Equipped with a universal joint device to make the page even and avoid tearing; the upper limit setting function of the force value can automatically return to protect the page when the set value is reached; Measurement range 0-300N, accuracy +/- 1%; support 5-120mm/min speed adjustable.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
Temperature range -40~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature alternating cycle test, suitable for pRoduct design improvement and identification inspection.
Adopting independent control design of hot and cold box, the temperature conversion time does not exceed 15 seconds, and the recovery time is within 5 minutes. Equipped with safety interlock function and standard lead hole tube, it enhances test efficiency and operation safety.
