Measurement range 0.23 nm g/L to 23 g/L, temperature compensation 5~ 50 ℃, suitable for high purity water and industrial drainage sodium ion concentration determination, repeatability error does not exceed 0.03pNa.
Measurement range 0~ 5mg/L, can be tested 100 times, supporting the use of special analytical instruments, the operation process is simple and fast, suitable for the determination of hexavalent chromium content in water quality.
With manual and automatic temperature compensation function, concentration Measurement range 1 × 10 ^ ²~ 5 × 10 ^ mol/L, the fastest reaction time is less than 4 minutes, support pFe value and iron Ion concentration display.
With manual and automatic temperature compensation function, Measurement range 0-6 PCL, resolution up to 0.01 PCL, easy operation and intuitive and accurate digital display, suitable for a variety of water quality monitoring scenarios.
Measurement range 0.000~ 0.3mg/L, can be 100 measurements, supporting special instruments to achieve fast and accurate water quality aluminum ion detection, including a variety of Reagent solutions.
Measurement range 0-300μg/L, accuracy +/- 10μg/L +/- 4%, LED Illuminant and reference Detector ensure measurement Stability, IP67 waterproof standard.
Calcium Ion concentration 1000ppm, PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating, to ensure measurement accuracy.
Colorimetric integrated tube with digestion is used to realize detection integration, the detection limit is 0.01mg/L, Optical inspection Stability ≤ +/- 0.001A/20min, supports multiple power supply modes and wireless data transmission, and the portable design is suitable for on-site rapid detection.
Constant background ion strength, Shielding interfering ions and adjusting sample pH value, capacity 480mL, PTFE bottle Encasement, suitable for a variety of ion measurement environment.
General ion standard solution with a concentration of 1000ppm, using PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating needs.
Measurement unit with Baume degree, sugar content accuracy +/- 0.1 ° Baumé, automatic temperature compensation, 1.5 seconds fast display results, only 2 drops of sample, waterproof design for a variety of environments.
Adopt automatic potential Titrimetric method, built-in standard method to directly read the results, support silver nitrate (AgNO3) calibration and blank experiment, data management can store 200 sets of results, titration analysis Repeatability of 0.20%.
Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 1% F. S, suitable for a variety of Ion concentration detection.
The imported cold light source does not need to be preheated for 100,000 hours, the detection limit is 0.01mg/L Sensitivity is high, the standard and continuous Measurement mode are supported, and the digestion Colorimetric integrated tube is safe and fast to operate. It can store 4000 sets of data and support a variety of transmission methods.
Measurement range 000-1.000 mg/L, accuracy +/- 0.010mg/L, LED Illuminant and unique reference Detector ensure Stability, support GLP data recording and automatic storage, waterproof design for a variety of environments.
