Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
Coating speed 1~ 10m/min adjustable, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, equipped with infrared drying and air cooling system to achieve efficient Spreader and drying.
High Accuracy modular Spreader station structure, Spreader thickness range of 0.01mm to 2mm, coating speed 2-4.5 m/min adjustable, support forward and reverse stepless variable speed and automatic winding, gap adjustment Graduation up to 0.001mm, easy to accurately control the Spreader process.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
Support 10 groups of samples synchronized testing and independent timing, temperature control range from room temperature to 70 ℃, hot air circulation to ensure Temperature uniformity, meet a variety of standard testing requirements.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
Equipped with a universal joint device to make the page even and avoid tearing; the upper limit setting function of the force value can automatically return to protect the page when the set value is reached; Measurement range 0-300N, accuracy +/- 1%; support 5-120mm/min speed adjustable.
Equipped with 10-station synchronous test capability, 1000g weight and 1-999999 minute Timer, using SUS #304 steel plate to ensure test accuracy, and automatically recording tape peeling time.
Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
