Designed according to ASTM D2801 standard, the groove depth range is 0.1-4 mm, which can test the leveling and sagging of coatings for rapid formulation adjustment and qualification verification.
Coating can measure the relative leveling of liquid, evaluate the ability to eliminate surface defects, Coating thickness range of 250~ 400 μm, groove depth coverage of 100 to 1000 μm.
K shape cogging structure, large tooth spacing, suitable for high viscosity Coating, excellent leveling, wet film thickness 230 μ m, application width 60mm.
The device can measure the ability of Coating to eliminate surface defects, wet film thickness range of 250~ 4000 μm, groove depth coverage of 250 to 4000 μm, in line with international standards.
K-shaped cogging structure design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 200μm, excellent leveling performance, suitable for glue and other viscous materials Spreader.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Groove depth 100-500μm adjustable five, Dimension 120 * 20 * 20mm, in line with ASTM D2801-1994 and JB/T3998-1999 standards, stainless steel material durable.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Using photo paper smooth surface combination technology, observing the imprint after applying a uniform load, the pressure range of the probe is 50-250N, and the diaMeter of the rubber probe is Φ 40mm, which can accurately evaluate the chalking grade of the paint film.
Dual function design can test leveling and sag at the same time, flow plane supports 5 kinds of film thickness Spreader, flow surface provides 10 kinds of film thickness range 75-300 micron, stainless steel material is acid and alkali resistant, in line with ASTM D4400 and D2801 standards.
