Adopt helical tooth bar/helical gear lifting system, add universal joint at connecting rotor, variable gear is high wear-resistant engineering plastic, viscosity range 1~ 2000000mPa.s, Measurement accuracy +/- 5% F.S.
Using 48.3 +/- 1.65S impeller Rotation Frequency and 2900 +/- 100rpm Rotation speed, the fibers were separated gently through four inner helical baffles, keeping the original structural characteristics of the fibers unchanged.
The slow speed Impeller operates in the laminar flow region, the liquid forms an axial up and down circulation along the helical surface, and the slurry diaMeter is 50mm, which is suitable for the mixing and heat transfer process of medium and high viscosity liquids.
The slow mixing design operates in the laminar flow area, the liquid forms an axial circulation along the helical surface, the diaMeter of the pulp sheet is 60mm, and the Rod length is 350mm, which is suitable for the treatment of medium and high viscosity media.
The slow-speed design operates in the laminar flow region, and the liquid forms an axial circulation along the helical surface. The slurry diaMeter is 70mm and the Rod length is 350mm. It is suitable for mixing and heat transfer of medium and high viscosity liquids.
The slow speed Impeller operates in the laminar flow region, the liquid forms an axial up and down circulation along the helical surface, the diaMeter of the pulp sheet is 80mm, and the Rod length is 350mm, which is suitable for mixing medium and high viscosity liquids.
The slow-speed design operates in the laminar flow region, and the liquid forms an axial circulation along the helical surface. The pulp sheet has a diaMeter of 50mm and a Rod length of 350mm. It is suitable for mixing medium and high viscosity liquids.
