The equipment can test three outsoles at the same time, the folding angle is 90 ° +/- 2 °, the folding speed is adjustable from 5 to 150rpm, and the tortuous performance of the sole is evaluated by measuring the growth rate of the incision.
The equipment can perform 90-degree zigzag testing, the folding speed can be switched between 60rpm and 100rpm, and the diaMeter of the zigzag shaft is 10mm. It supports multi-standard testing and is easy and efficient to operate.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
Ruby Probe wear-resistant, measurement range 0~ 5000μm, error +/- 2~ 3%, built-in LED light, IP65 Protection Rating, chemical resistant material, suitable for chemical cleaning.
Fiber wear-resistant pen design, Test accuracy of +/- 0.5 dyne, 15ML large capacity can be tested multiple times, 2-4 seconds to quickly obtain results, suitable for a variety of materials Surface Energy testing.
Using fiber wear-resistant pen tip, size 138mm long, 15ml large capacity, Accuracy up to +/- 0.5 dyne, can test a variety of materials Surface Energy value and cleanliness, easy and fast operation.
Made of wear-resistant and corrosion-resistant alloy steel, with a Hardness of 52 +/- 2HRC, it has upper and lower working surfaces to improve work efficiency and tool life.
Equipped with six independent stations and two Lisaru motion trajectories, it supports a maximum of 999999 counts, and adopts a movement speed of 50rpm, which can simultaneously test the wear resistance performance of multiple sets of samples.
Spreader formed process to ensure uniform wear-resistant stainless steel material corrosion-resistant durable, wet film thickness of 450 μ m, effective application width of 300mm, without the handle directly grip operation.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and the wet film thickness is 550μm.
