Measurement range 20-90HC, resolution 1HC, Indication Error ≤ +/- 1HC, suitable for microporous hardness of materials testing.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
Measurement range 0~ 100HC, error +/- 1HC, suitable for the detection of microporous materials with stress above 0.049MPa when the compression rate is 50%.
Equipped with dedicated host computer software to realize data storage analysis, support peak mode and automatic Timing function, Measurement range 20-90HC, resolution 0.1HC, with a variety of coordinate Linear dispersion display and qualified judgment ability.
Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
The pressure spring is used to achieve a constant linear relationship, the pressing needle Travel 0-2.5 mm, measurement error +/- 1HC, can be used in hand or installed on the measuring rack, suitable for the test of microporous materials for shoes.
Suitable for the determination of materials with high Hardness, Measurement range 20-90HD, Indication Error ≤ +/- 1 HD, using Dial display, easy to operate, suitable for rubber and plastic and microporous materials.
According to the Richter Hardness Measurement principle, it can perform High Accuracy detection on all metal materials, support a variety of Hardness standard conversion, Measurement range HLD 170-960, can store 600 sets of data, equipped with true color screen and USB interface.
Support user material calibration function, can store 600 sets of measurement data, equipped with 3.5 inch IPS full view LCD screen, Continuous Operating Time more than 10 hours, automatic identification Probe type without recalibrating.
Made of stainless steel to ensure wear resistance and corrosion resistance, 750g test load to meet a variety of international standards, equipped with a complete pencil set for accurate coating Hardness assessment.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the maximum Hardness 940HV, suitable for asperity 1.6μm surface, minimum test thickness 5mm, Che diaMeter and depth vary with Hardness.
Suitable for materials with Hardness > 90HA and < 20HD, especially for thin or curved samples. Measurement modes of real-time, peak, automatic timing and average value, force retention time can be set, and data Linear dispersion analysis and qualification judgment can be carried out by the host computer software.
Compact size of only 130 * 76 * 32mm, support six hardness standards conversion, can store 50 sets of measurement data, with 360 ° measurement direction adaptability and RS232 communication interface, to meet a variety of industrial field testing needs.
Equipped with 20 different Hardness pencils, covering the range of 8B to 10H, made of stainless steel, supporting 750g to 1000g load, according to Wolff Wilborn specification measurement coating scratch resistance.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure a variety of metal hardness of materials, Che diaMeter minimum 0.35mm, suitable for conventional Hardness testing needs.
