Brushless DC motor, Rotation speed 100rpm, support positive and negative rolling mode, compatible with different size testtube, low noise and maintenance-free operation, suitable for long-term continuous operation.
Adopting the principle of the inclined rolling ball method, the adhesion is measured by the short contact between the steel ball and the sample, the adjustment range of the tilt angle is 0-60 °, and the rolling ball of 1/32 to 1 inch is supported. The width of the test area is 80mm.
Adopting the test principle of inclined rolling ball method, the tilt angle adjustment range is 0~ 40 °, equipped with 32 GCr15 bearing steel balls, and the shape tolerance accuracy exceeds GB/T308 level 40 to achieve accurate initial Tack evaluation.
Brushless DC motor, Rotation speed 100rpm, low noise maintenance-free, support normal and negative two rolling modes, compatible with different size testtube, gentle rolling to ensure sample safety.
Rotation speed 100rpm, low noise and maintenance-free; support positive and negative rolling swing mode, compatible with different size testtubes, gentle rolling to ensure sample safety, continuous operation and reliability.
DC brushless motor, Rotation speed 100rpm, support positive and negative rolling mode, gentle mixing and compatible with a variety of testtube sizes, suitable for long-term continuous operation, low noise and maintenance-free.
Measurement range 0-12.7 mm, resolution 0.001mm, with electric swirl/spin, automatic statistical extreme deviation, multi-level account management and test result audit traceability.
Three-axis linkage automatic precision control, intelligent cutting can change the amount of feed according to the hardness of materials, the maximum cutting section is 100 × 100mm, equipped with mobile magnetic filtrate circulating water Tank and fully enclosed safety structure.
Using three-axis automatic precision control, the maximum cutting section of 200 * 150mm, with intelligent cutting function can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the cutting mass.
Adopt three-axis linkage system, spindle Rotation speed 24000rpm, accuracy resolution 0.003mm, support a variety of spline and notch processing, with material Water-Cooled and processing compensation functions, one processing can complete a variety of splines.
With three-axis linkage automatic precision control, the maximum cutting section of 100 × 100mm, intelligent cutting can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the surface mass of the sample.
Adopt dual-axis constant force lifting system, lift Travel 200mm, speed range 60-8000rpm, digital direct display Rotation speed, equipped with dispersed impeller and sand grinding disc, adapt to different experimental needs.
Adopt dual-axis constant force lifting system, lifting Travel 400mm; Rotation speed up to 8000rpm, linear speed up to 41m/s; High-speed dispersion disc generates strong shear force to achieve uniform dispersion and suspension effect of materials.
Six-axis planetary stirring structure, equipped with high-speed disperser and low-speed twist paddle, Rotation speed 0-90rpm, dispersion Rotation speed 0-3800rpm, can achieve no dead angle mixing of materials, and has an online temperature measurement system, temperature error less than 1 ℃.
Using electronic control and liquid crystal display, the automatic swirl/spin test is easy to operate, with an accuracy of 0.01mm. The special fixture ensures that the bottle body is not deformed, and the platform is stable to ensure accurate results. It is suitable for a variety of bottle container detection.
