The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
Using clutter flying technology implementation of ultra-thin parts measurement, minimum Film thickness of 0.15mm, the highest resolution of 0.001mm, with two Measurement modes and through the coating measurement function, equipped with 15MHz single crystal delay probe.
Mixing method of low speed intermittent sticking barrel edge, L-type paddle mixing design makes inks flip and cut, mixing evenly within five minutes without heating up, Speed range 0~ 60rpm, transmission mode is direct transmission to reduce power loss.
Mixing method, L-shaped integral forming Impeller without screw hole easy to clean, Speed range 0~ 60rpm, direct drive to reduce power loss, can set the mixing time and equipped with moving pulley.
Using clutter flying technology implementation of 0.15mm ultra-thin parts measurement, the highest resolution of 0.001mm, support through coating measurement and Bluetooth communication, with voice broadcast and LED backlight function.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the 150mm paddle is suitable for medium and high viscosity liquids, which can effectively crush the particles in the liquid.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Six-axis planetary stirring structure, equipped with high-speed disperser and low-speed twist paddle, Rotation speed 0-90rpm, dispersion Rotation speed 0-3800rpm, can achieve no dead angle mixing of materials, and has an online temperature measurement system, temperature error less than 1 ℃.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
The equipment adopts the mechanical action of flying knife roller and bottom knife, which can handle 200-700g absolute dry slurry, the speed of flying knife roller is 500 +/- 10rpm, and supports heavy thallium pressure adjustment and automatic beating time control, so as to realize fiber refinement and beating degree. Precise regulation.
The four-blade structure makes the mixed medium flow up and down radially, forming strong turbulence and high shear force. The diaMeter of the slurry is 50mm, which is suitable for stirring medium and high viscosity liquids and effectively crushing particles in liquids.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
The 10x30mm standard size design ensures a perfect match with the SH1117 Tester, providing accurate gel strength measurement results.
