The equipment integrates stirring, dispersing, grinding functions, motor Power 750W, speed range 60~ 8000rpm, can handle materials with a viscosity of 100000mPa.s, through high-speed swirl/spin to generate strong shear force to achieve efficient Mixing & dispersing.
Adopt brushless motor to achieve 0-8000rpm variable frequency speed regulation, equipped with stainless steel dispersion disc and grinding wheel, through hydraulic shearing and high frequency mechanical effect to achieve efficient Mixing & dispersing, the maximum processing viscosity of 20000cp.
Speed range 0~ 20000rpm wide adjustable, equipped with high-speed series motor and stable silicon control system, integrated photoelectric speed measurement to ensure accurate reading, compact structure and convenient operation.
Using large-screen touch screen operation, intelligent control of grinding time and speed, grinding results are highly repeatability. The dual-Tank design supports high-throughput processing, and the discharge particle size can reach 5~ 10 μm. It is suitable for heat-sensitive materials and consumes very little liquid nitrogen.
Speed range 300 to 1000rpm, equipped with chilled down water pipe and grinding disc flushing function, leak-proof spindle design to improve bearing life, suitable for wet grinding and a variety of sample processing.
With a wide speed range of 0~ 10000rpm and 280mm lift Travel, using frequency conversion electromechanical operation quiet noise, support high-speed dispersion, stirring and grinding functions, suitable for 0~ 2L Processing capacity.
Using brushless motor to achieve 0-8000rpm stepless speed regulation, Processing capacity up to 10L, set dispersion and grinding functions in one, lifting Travel 260mm, suitable for high viscosity materials.
With 5000-18000rpm three speed range, suitable for 1.5ml centrifuge tube operation, grinding pestle supports high temperature sterilization and easy disassembly, battery life exceeds 1 hour, to meet the needs of various biological sample processing.
The double Tank design is used to achieve high-throughput grinding, the vibration speed is adjustable from 60 to 1800rpm, and the discharge particle size is 5 to 10 μm. It supports dry grinding, wet grinding and low temperature grinding, and effectively protects the molecular structure of heat-sensitive materials.
The equipment is equipped with independent control dual disk system, supports 700/900/1400rpm three-speed Rotation speed switching, adopts cabinet structure for easy storage of consumables, and integrates chilled down water pipe to realize wet grinding operation, and improves sample preparation efficiency and Stability.
Using 60-1800rpm vibration speed, the discharge particle size can reach 5~ 10μm, support dry grinding, wet grinding and low temperature grinding, suitable for heat-sensitive materials and minimal liquid nitrogen consumption, can handle more than 10 samples at a time.
Double disk system independent control of grinding polishing, stepless speed range of 50~ 1400rpm, cabinet structure is easy to store consumables, equipped with chilled down water pipe to support wet grinding, suitable for a variety of sample processing processes.
With 60-1800R/min vibration speed and 1-30Hz Frequency range, support dry grinding, wet grinding and low temperature grinding, can handle feed ≤ 8mm sample to 5~ 10μm particle size, suitable for thermal materials and low liquid nitrogen consumption.
Adopt thyristor high-speed adjustment system, photoelectric speed measurement electronic circuit to ensure reliable Rotation speed, homogenization knife Speed range of 22000rpm, Processing capacity 1000ml, easy to operate and intuitive reading.
The equipment uses a spring lift system, lift Travel 200mm, speed range of 60~ 8000rpm, can adapt to different experimental needs, through the digital PID technology implementation High Accuracy control, and provide dispersed impeller and sand grinding disc.
