The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
It can measure the surface roughness of the groove with a width of more than 3mm and a groove depth of less than 10mm, and can also measure the plane and cylinder. It can be stably detected with a special measurement platform.
It can measure the groove surface roughness with a groove width greater than 2mm and a groove depth less than 3mm, and supports both flat and cylindrical measurement. It can be accurately detected with a special measurement platform.
The leveling is evaluated by film fringe close test, the groove depth is 250-4000 μm, and the 5 pairs of grooves are designed to facilitate the observation of fringe changes, which is suitable for Dry-Film surface Smoothness detection.
With 5 pairs of grooves designed, the groove depth covers the range of 100 to 1000 μm, which can accurately test the surface Smoothness of paints Dry-Film and reduce unevenness such as brush marks and spray points.
The continuous groove design prevents clogging by impurities, with a wet film thickness of 84.6 μm and a diaMeter of 6.35 mm, making it suitable for high-viscosity coatings and easy to clean and maintain.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Using a formed pRoduction process to form a continuous groove, wet film thickness 5μm, diaMeter 10mm, not easy to clog and easy to clean, fine workmanship.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Using CR12 molybdenum vanadium material to ensure durability, providing 75-600μm multi-film thickness range, double-sided design can complete different thickness Spreader at one time, effective application width 80mm to meet the requirements of standard samples.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
